UniqueKiosk · Shenzhen workshop

Metal Handbag Display Rack with Six Shelves, 900 mm

$720.00

A handbag display rack with a black steel frame, six lit shelf levels and a base drawer cabinet. Price range: USD 150-800, set by height and frame finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Six Open Shelf Levels

This handbag display rack uses a black steel frame with six open shelf levels. White back panels sit behind each level and bounce light forward, so a bag reads against a bright face. Shelves are open at the front and both ends, so a shopper can lift a bag from any side. A white base cabinet with two drawers closes the bottom of the run. The rack is 900 mm wide, 450 mm deep and 2000 mm tall. A handbag display rack like this works as a single wall bay or a pair on one wall.

Frame and Shelf Build

The frame is 25 mm square steel tube with a matte black powder coat. Shelf boards are 18 mm with a white laminate face and a white edge. Back panels are 9 mm board with a white finish. The base cabinet is 18 mm plywood with two drawers on ball slides and small round pulls. Load is 15 kg per shelf. Weight is 76 kg. Every handbag display rack is welded on a jig, so the six levels stay parallel down the run. Feet take a 20 mm level range.

Shop Floor Placement

Set the rack on a wall with 900 mm clear in front. A customer can then step back and see a full bag. Keep the top level near 1900 mm and the base near 500 mm. Group by size on one level and by colour across the next. A handbag display rack also suits a department store aisle end. Put the hero bag at eye level, near 1400 mm. Compare retail shelving bays or clothing racks rails. Each handbag display rack holds 24 bags.

Specification Detail
Dimensions 900 x 450 x 2000 mm
Levels 6, 18 mm white laminate
Frame 25 mm steel, matte black
Base 2 drawers, ball slides
Shelf load 15 kg each
Feet adjustable, 20 mm range
Weight 76 kg

Load and Care

Each shelf holds about four bags, so a full rack shows 24 pieces. Keep heavy totes on the lower levels. A handbag display rack at 76 kg stands steady, but a wall strap is wise in a busy aisle. Wipe the white panels with a dry cloth. Check the frame bolts each quarter and touch up chips on the black coat. store operations teams rotate the top level each week. A full handbag display rack shows 24 bags in six rows.

Delivery and Build

The rack ships in two cartons: frame parts and shelf boards. One person builds it in about 30 minutes. Stand the two side frames, fit the cross rails, then drop the shelves in. Weight is 76 kg. Build it on the floor where it will stand, because the frame is awkward to move once dressed. retail displays covers other display pieces.

Cost and Custom Build

Six open levels put a bag range in view without a glass case. White back panels lift a dark bag. The base drawers keep dust bags and tags out of sight. An open frame leaves the floor visible, which suits a small bay. A 900 mm width fits most wall gaps. List price starts at USD 720 for the 2000 mm rack. Ukiosks builds this handbag display rack in any width, level count and frame colour. Our team quotes from a wall measurement. Browse retail displays for display pieces, or send a plan through our contact page.

Reviews

There are no reviews yet.

Be the first to review “Metal Handbag Display Rack with Six Shelves, 900 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop