UniqueKiosk · Shenzhen workshop

Black Necklace Display Cabinet with LED Shelves, 900 mm

$1,250.00

A necklace display cabinet with four lit shelf rows and a two door lower cabinet. Price range: USD 700-1,500, set by height and shelf count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Four Lit Shelf Rows

This necklace display cabinet carries four shelf rows behind a glass front. Each row has a thin LED strip under the shelf above, so light falls on the neck of every bust. A clear glass panel closes the upper half and keeps hands off the stock. Busts stand on white forms at a fixed spacing. Below, a two door cabinet takes boxes and pads. The unit is 900 mm wide, 400 mm deep and 2000 mm tall. A necklace display cabinet works as a single wall bay or a pair. One unit holds 32 necklaces.

Body and Light Build

The body is 18 mm board with a black low sheen laminate. Shelves are 12 mm board, each rated at 15 kg. The glass front is 5 mm tempered with a lock on the right frame. LED strips run on a 12 V driver inside the top cap. The lower cabinet has two doors with silver bar handles and a magnetic catch. Weight is 118 kg. Every necklace display cabinet is built on a level plinth, so the four rows read in one line.

Wall Placement

Fix the cabinet to a wall with 900 mm clear in front. Keep the top row near 1900 mm, so a shopper reads it without tipping back. Sort by metal tone across one row and by length down the rows. A necklace display cabinet also works in a boutique window run. Two units on one wall make a full necklace wall. Compare jewelry displays trays or display cases floor cases. Each necklace display cabinet holds 32 pieces.

Specification Detail
Dimensions 900 x 400 x 2000 mm
Shelves 4 rows, 12 mm board
Glass 5 mm tempered, lockable
Light 12 V LED strip per row
Lower cabinet 2 doors, silver handles
Shelf load 15 kg each
Weight 118 kg

Load and Cleaning

Each row takes about eight busts, so a full cabinet shows 32 necklaces. Keep heavier stone pieces on the lower rows. A necklace display cabinet at 118 kg must be wall fixed, because the glass front is top heavy. Wipe the glass with a soft cloth and no solvent. Dust the shelves each week, since an LED strip shows spots. Check the strip joints every quarter. store operations teams count busts at open and close. One necklace display cabinet carries 32 busts.

Delivery and Fit

The cabinet ships in two cartons: body and glass. Two people install it in about 60 minutes. Stand the body, fix the wall strap, then fit the glass front and lock. Weight is 118 kg, so a trolley is needed. Test the LED before the glass goes on. Leave 40 mm behind for the driver box. retail displays covers other jewellery pieces.

Cost and Custom Build

Four lit rows show 32 necklaces in one narrow bay. A glass front keeps the stock clean and safe. The black body lifts a gold chain, and the LED strips sit out of sight. A two door base hides pads and boxes. One cabinet fits a 0.9 m wall gap. List price starts at USD 1,250 for the 2000 mm cabinet. Ukiosks builds this necklace display cabinet in any height, row count and body colour. Our team quotes from a wall measurement. Browse retail displays for display pieces, or send a plan through our contact page.

Reviews

There are no reviews yet.

Be the first to review “Black Necklace Display Cabinet with LED Shelves, 900 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop