UniqueKiosk · Shenzhen workshop

Marble Cosmetic Display Cabinet with Eight Drawers, 1200 mm

$1,150.00

A cosmetic display cabinet with a sloped stepped top and eight marble faced drawers. Price range: USD 700-1,500, set by size and drawer count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Sloped Stepped Top

This cosmetic display cabinet carries a sloped top with three stepped tiers. Small square slots sit in rows on each tier, so bottles line up on a slight angle. A low glass rail runs along the back edge and stops a tester from rolling off. The slope starts near 900 mm at the front and rises to 1100 mm at the back. A shopper reads every row from the aisle without bending. The cabinet is 1200 mm wide, 550 mm deep and 1150 mm tall. A cosmetic display cabinet suits a beauty hall or a pharmacy bay. Each tier holds 24 bottles.

Body and Drawer Build

The body is 18 mm plywood with a white lacquer finish. Eight drawers run in two columns of four, each faced in a grey marble print. Drawer boxes are 15 mm board with metal sides and soft close runners. Wood bar handles sit on each front. Every cosmetic display cabinet uses a levelled plinth, so the drawer rows stay square. Load is 20 kg per drawer and 15 kg on the top tiers. The glass rail is 5 mm tempered.

Shop Floor Placement

Place the cabinet against a wall or inside a bay, with 800 mm clear in front. Keep the top tier near 1100 mm, so a standing shopper sees the last row. Group shades by brand on one tier and by product type on another. A cosmetic display cabinet also works well beside a pay point. Put testers on the lowest tier, where hands reach first. Compare countertop displays trays or display cases counter cases. One cosmetic display cabinet holds 288 bottles.

Specification Detail
Dimensions 1200 x 550 x 1150 mm
Top sloped, 3 stepped tiers with slots
Drawers 8, soft close runners
Fronts grey marble print, wood handles
Body 18 mm plywood, white lacquer
Drawer load 20 kg each
Weight 96 kg

Load and Daily Use

Each drawer holds about 12 bottles on a divider tray. Keep the heavier glass bottles in the lower drawers. A cosmetic display cabinet at 96 kg stays firm on a level floor. Clean the marble fronts with a damp cloth and dry them after. Wipe the sloped tiers each morning, because dust collects in the slots. Check the runners once a quarter and oil the soft close arm. store operations teams refill the top tier before opening. A full cosmetic display cabinet holds 288 bottles.

Delivery and Install

The cabinet ships as one body plus the drawer set and the glass rail. Two people set it in about 40 minutes. Place the plinth, stand the body, slide the drawers in, then fit the glass rail. Weight is 96 kg, so a trolley helps. Leave 30 mm at the wall for a skirting board. Check the slope before loading stock, because a tilt shows at once. retail displays covers other counter pieces.

Cost and Custom Build

A sloped top puts many small items in view at one time. Eight marble drawers hide back stock inside the same footprint. The glass rail keeps testers in place. Slots hold bottles upright, so labels face the shopper. Wood handles warm a white body. One cabinet fits a 1.2 m bay. List price starts at USD 1,150 for the 1200 mm cabinet. Ukiosks builds this cosmetic display cabinet in any width, slot size and drawer layout. Our team quotes from a floor plan. Browse retail displays for counter pieces, or send a plan through our contact page.

Reviews

There are no reviews yet.

Be the first to review “Marble Cosmetic Display Cabinet with Eight Drawers, 1200 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop