UniqueKiosk · Shenzhen workshop

Corner Hook Stand with Pegboard Panels, 900 mm

$1,180.00

A corner hook stand with black pegboard panels, an LED top strip and an oak base cabinet. Price range: USD 700-1,500, set by size and finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

L Corner Pegboard

This corner hook stand puts two pegboard panels in an L shape. The panels meet at a right angle. A shop can drop the unit into a wall corner and use both faces. Small steel hooks sit in the pegboard holes at a 40 mm pitch. A thin LED strip runs along the top frame and lights the stock from above. Below, an oak base cabinet with two doors holds back stock. The stand is 900 mm on each arm, 400 mm deep and 1800 mm tall. A corner hook stand keeps a dead corner working. Each arm is 900 mm long.

Panel and Frame Build

Panels are 18 mm board with a black laminate face and a 5 mm pegboard overlay. The frame is 30 x 30 mm steel with a black powder coat. Hooks are 4 mm wire with a 2 kg load each. The LED strip runs on a 12 V driver inside the top rail. The base is 18 mm plywood with an oak veneer and two hinged doors. Weight is 88 kg. Every corner hook stand is squared on a jig before the panels go on, so the corner joint stays tight.

Corner Placement

Set the stand into a wall corner with 900 mm clear in front of each face. Keep the upper hooks near 1600 mm for light packs and the lower rows for heavier items. A corner hook stand also suits a kiosk that needs one compact display point. Group by device model on one face and by accessory type on the other. Compare retail displays pieces or wall fixtures panels. A corner hook stand suits a 0.9 m corner.

Specification Detail
Dimensions 900 x 400 x 1800 mm, L shape
Panels 18 mm board, black pegboard
Frame 30 mm steel, black coat
Hooks 4 mm wire, 2 kg each
Light 12 V LED strip, top rail
Base 2 doors, oak veneer
Weight 88 kg

Load and Light

Hooks take 2 kg each, so a full face carries about 60 small packs. Keep cases on the base doors and cables on the lower rows. A corner hook stand at 88 kg stands stable in a corner, so no wall strap is needed. Switch the LED from a rocker on the top rail. Wipe the panels with a dry cloth. Check the hooks each month for a bent end. store operations teams refill the top rows first. One corner hook stand holds 120 packs.

Delivery and Build

The stand ships in three cartons: frame, panels and base. Two people build it in about an hour. Stand the base, fix the panels on both arms, then set the top rail. Weight is 88 kg. Check the corner joint before loading hooks. Leave 30 mm at each wall for a skirting board. retail shelving covers shelf pieces beside the corner.

Cost and Custom Build

An L corner turns two wall faces into one display point. Pegboard hooks take a changing range without new shelves. An LED strip lifts the upper rows. Oak base doors hide stock and boxes. A 900 mm arm fits a small corner. List price starts at USD 1,180 for the 1800 mm stand. Ukiosks builds this corner hook stand in any arm length, hook count and panel colour. Our team quotes from a corner measurement. Browse retail displays for display pieces, or send a plan through our contact page.

Reviews

There are no reviews yet.

Be the first to review “Corner Hook Stand with Pegboard Panels, 900 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop