UniqueKiosk · Shenzhen workshop

Walnut Eyewear Display Stand with Three Doors, 1200 mm

$860.00

A walnut eyewear display stand with five arm rows over a three door base. Price range: USD 400-1,200, set by width and finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Arm Rows and Counter

This eyewear display stand pairs a slotted back panel with a working counter. Five slot rows carry thin metal arms. Each arm runs forward, so a frame sits open for a customer to pick up. A white counter crosses the middle at waist height. Below it, a walnut base with three doors holds stock and cases. The stand is 1200 mm wide, 500 mm deep and 1450 mm tall. An eyewear display like this fits an optical corner or a department store bay. Walnut grain gives a warm frame against pale walls.

Panel and Base Build

The back panel is 25 mm board with a walnut veneer and a matt lacquer. Slot rows sit on a 120 mm pitch, cut on a CNC line so the arms stay level. Arms are 8 mm steel tube with a polished finish and a 2 kg load each. The counter top is 20 mm solid surface with a white finish. The base is 18 mm plywood with three hinged doors. Weight is 104 kg. Each eyewear display is tested with a full row of frames before it ships.

Bay Planning

Set the stand against a wall with 900 mm clear in front. That space lets a customer step back and read a row. Keep the counter near 900 mm for a fitting tray. Group by frame shape across a row and by colour down the panel. Use the base doors for cases and cleaning cloths. An eyewear display also suits a boutique that sells sunglasses in season. Compare retail displays pieces or wall fixtures panels. An eyewear display suits a 1.2 m wall gap.

Specification Detail
Dimensions 1200 x 500 x 1450 mm
Back panel 25 mm board, walnut veneer
Arm rows 5, 120 mm pitch
Arms 8 mm steel tube, 2 kg each
Counter 20 mm solid surface, white
Base 3 doors, plywood core
Weight 104 kg

Load and Cleaning

Each arm takes 2 kg, which covers a frame and a tag. Keep the top row for light frames only. The counter holds a fitting mirror and a tray. An eyewear display at 104 kg stands steady, but a wall strip helps in a busy aisle. Each row holds 14 frames. Wipe the walnut with a dry cloth and the counter with a damp one. Check the arm slots each month. One eyewear display holds 70 frames. store operations teams reset frames at close.

Delivery and Setup

The stand ships in three cartons: base, back panel and arms. Two people build it in about an hour. Set the base, bolt the panel on, fix the counter, then push the arms into their slots. Weight is 104 kg. Level the base before the panel goes up. Leave 40 mm behind the panel for a wall strap. countertop displays covers bench trays beside the stand.

Cost and Custom Build

Five arm rows show a full frame range in one bay. A waist high counter gives a place to fit and compare. Three doors keep cases out of sight. Walnut reads warm against metal arms. The slot pitch can change as a range grows. List price starts at USD 860 for the 1200 mm stand. Ukiosks builds this eyewear display in any width, row count and wood finish. Our team quotes from an optical plan. Browse retail displays for display pieces, or send a plan through our contact page.

Reviews

There are no reviews yet.

Be the first to review “Walnut Eyewear Display Stand with Three Doors, 1200 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop