UniqueKiosk · Shenzhen workshop

Multifunctional Display Rack with Mesh Back, 800 mm

$580.00

A multifunctional display rack with eight box cubbies, two hook arms and a mesh back panel. Price range: USD 150-800, set by height and finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Cubbies and Hook Arms

This multifunctional display rack mixes closed cubbies with open hooks. Eight box compartments sit in four rows, two across, on the left of the frame. Two straight arms run out on the right for bags or folded garments. A diamond mesh panel fills the back behind the arms. The rack is 800 mm wide, 400 mm deep and 1800 mm tall. A multifunctional display rack gives a small bay two ways to hold stock. A grey plinth keeps the base clear of a mop, and the plinth is 120 mm high.

Steel and Mesh Build

The frame is 30 x 30 mm steel tube with a grey powder coat. The mesh is 3 mm wire on a 20 mm diamond pitch. Cubbies are 15 mm board with a grey laminate face. Hook arms are 12 mm tube with a capped end. Each arm takes 12 kg. Weight is 48 kg. Every multifunctional display rack is welded and coated as one frame, then the cubbies bolt on. The header takes a plain panel with no print. The cubby stack bolts to the frame with six screws, so a shop can add shelves later.

Bay Layout

Set the rack near a wall with 900 mm clear in front. Put folded stock in the cubbies and bags on the arms. Keep the top cubby rows for light items. The mesh back lets a wall colour show through. A multifunctional display rack suits a boutique or a concept store. Two racks make a short run. Compare retail displays floor pieces or clothing racks rails. A multifunctional display rack suits a 0.8 m bay.

Specification Detail
Dimensions 800 x 400 x 1800 mm
Frame 30 mm steel, grey powder coat
Cubbies 8, 15 mm board
Mesh 3 mm wire, 20 mm pitch
Arms 2, 12 kg each
Cubby load 8 kg each
Weight 48 kg

Load and Access

Cubbies take 8 kg each, and arms take 12 kg. Keep heavy folded stock in the low rows. A multifunctional display rack with a light base can tip, so fix the top frame to a wall rail. Check the arm bolts each month. Leave 40 mm inside a cubby so stock does not catch the edge. store operations teams refold stock each morning. One multifunctional display rack holds 40 folded pieces, which is one season of knitwear.

Delivery and Setup

The rack ships in two cartons: frame and cubbies. Two people build it in about 40 minutes. Stand the plinth, fit the frame, then bolt the cubby stack and the arms. Weight is 48 kg. Level the plinth before loading. Leave the header off until the frame is fixed. One person can move the frame on a sack truck before the cubbies go on. wall fixtures covers wall pieces beside a rack.

Cost and Custom Build

One frame gives cubbies, hooks and a mesh back. A small bay gains three ways to show stock. Grey steel suits pale walls and warm floors. The mesh keeps the back light instead of solid. Cubbies can be swapped for shelves later. List price starts at USD 580 for the 1800 mm rack. Ukiosks builds this multifunctional display rack in any height, cubby count and colour. Our team quotes from a drawing. Browse retail displays for display pieces, or send a plan through our contact page.

Reviews

There are no reviews yet.

Be the first to review “Multifunctional Display Rack with Mesh Back, 800 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop