UniqueKiosk · Shenzhen workshop

Gondola Shelving Unit with Slatwall Panels, 1200 mm

$620.00

A double sided gondola shelving unit with white shelves, wood caps and slatwall ends. Price range: USD 150-800, set by length and panel finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Two Faces in One Footprint

This gondola shelving unit carries five shelf levels on each face. The body stands on a wood grain base, and a wood grain cap closes the top. The ends take slatwall panels, so a shop can hang hooks or small trays there. The unit is 1200 mm long, 500 mm deep and 1600 mm tall. A gondola shelving unit like this serves two aisles from one mid floor slot. Stock faces a walkway on both sides, which suits a small shop. The cap is 100 mm deep.

Shelf and Panel Build

Shelves are 25 mm board with a white laminate face and a white edge band. Uprights are 40 x 60 mm steel with a white powder coat. The base and cap are 18 mm board with a wood grain laminate. End panels take 8 mm slatwall inserts. Each shelf takes 60 kg. Weight is 84 kg. Every gondola shelving unit is welded square and levelled before the panels go on.

Aisle Planning

Run the unit along a mid floor line with 1000 mm clear on each side. Keep the top shelf at 1400 mm so stock stays in reach. Group by category on one face and by brand on the other. A slatwall end shows hooks for small items at the aisle head. Two units make a 2.4 m run. A gondola shelving unit also works as a shop divider. Compare retail shelving bays or wall fixtures panels. A gondola shelving unit suits a narrow aisle.

Specification Detail
Dimensions 1200 x 500 x 1600 mm
Shelves 5 per face, 25 mm board
Uprights 40 x 60 mm steel, white
Base and cap 18 mm wood grain board
End panels 8 mm slatwall inserts
Load 60 kg per shelf
Weight 84 kg

Load and Tipping

Each shelf takes 60 kg when weight sits flat. Keep heavy cartons on the low shelves on both faces. A gondola shelving unit with an uneven load can tip, so tie the cap to a neighbour. Check the shelf clips each month. Leave 30 mm at the shelf edge for a label strip. store operations teams sweep the base each morning. Tie the unit to a wall if the aisle is a through route. One gondola shelving unit holds 200 packs.

Delivery and Fit

The unit ships flat in two cartons: frame and panels. Two people build it in about an hour. Stand the base, fix the uprights, set the shelves, then add the cap and the end panels. Weight is 84 kg. Level the feet before loading. Leave the end panels off until the run lines up. retail displays covers display pieces for a mid floor bay.

Cost and Custom Build

Two faces double the selling area of one mid floor slot. A wood grain cap and base soften a white shelf run. Slatwall ends turn a plain head into a hook zone. Five levels per face hold about 200 packs. Floor footprint stays small. List price starts at USD 620 for the 1200 mm unit. Ukiosks builds this gondola shelving unit in any length, level count and panel finish. Our team quotes from an aisle plan. Browse retail displays for shop fittings, or send a plan through our contact page.

Reviews

There are no reviews yet.

Be the first to review “Gondola Shelving Unit with Slatwall Panels, 1200 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop