UniqueKiosk · Shenzhen workshop

Phone Display Table with Stepped Shelves, 1200 mm

$780.00

A phone display table with a white top, two stepped shelves and oak cores. Price range: USD 400-1,200, set by size and finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Three Stepped Levels

This phone display table stacks three levels in a stepped plan. The top is white and flat for demo units. Two lower shelves step forward and down, so a shopper sees every row from the aisle side. Light oak cores hold the levels apart and add warmth under white. A white plinth closes the base. The unit measures 1200 mm wide and 950 mm deep. A phone display table of this shape shows four models per row without a wall. The step height is 180 mm.

Board and Finish

Tops and steps are 30 mm MDF with a white matte laminate and a 2 mm edge. Cores are 600 mm wide oak veneer blocks. The plinth is 18 mm board with a white face and levelling feet. Joints use a mitred edge so no line shows on the step face. Weight is 62 kg. A phone display table built this way carries 40 kg on the top. Each level holds 25 kg across its span.

Shop Floor Layout

Set the table mid floor with 900 mm clear on the approach side. Face the stepped side toward the door so rows read on entry. Put demo phones on the top and accessories on the lower steps. Two tables make a device wall without a fixture. The 950 mm depth suits a narrow aisle. A phone display table also works in an electronics store or a carrier shop. One phone display table holds 16 units. Compare retail displays floor pieces or countertop displays bench trays.

Specification Detail
Dimensions 1200 x 950 x 900 mm
Top 30 mm MDF, white laminate
Steps 2, stepped forward
Cores oak veneer blocks
Load 40 kg top, 25 kg per step
Base white plinth, levelling feet
Weight 62 kg

Security and Service

Fit security pucks on the top level, since that row sits at hand height. Run the cables through a chase behind the oak core. Keep the lower steps for cases and chargers, so staff restock without bending. A phone display table leaves the top edge clear for a price card. Lock a demo unit to the puck each morning. store operations teams wipe the laminate daily. Any phone display table needs a power point within 2 m.

Delivery and Fit

The table ships as four parts: top, two steps and the plinth. Two people build it in about 30 minutes. Fit the cores to the plinth, then set each step, then the top. Cables go in before the top goes down. Weight is 62 kg. Level the feet on tile or timber. retail shelving covers shelf runs behind the table. store display planning covers floor plans around a device bay.

Cost and Custom Build

Three levels in one footprint double the visible stock. A stepped plan reads from the door, which helps a small shop. White and oak suit a clean electronics look. The plinth hides feet and cable ends. Width, level count and core finish all follow the plan. List price starts at USD 780 for the 1200 mm unit. Ukiosks builds this phone display table in any size, step count and finish. Our team quotes from a drawing. Browse retail displays for more floor pieces, or send a plan through our contact page.

Reviews

There are no reviews yet.

Be the first to review “Phone Display Table with Stepped Shelves, 1200 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop