UniqueKiosk · Shenzhen workshop

Perfume Display Shelving with LED Lights, 1000 mm

$720.00

A perfume display shelf built on a white drawer cabinet, with gold posts and edge lit tiers. Price range: USD 150-800, set by height and light.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Tiers on Gold Posts

This perfume display shelf stacks three open tiers on two slim posts. The posts rise from a white work top, and each tier sits out on a bracket. An LED edge runs under every shelf face, so a bottle lit from above reads clean. The base is a four drawer cabinet with gold bar pulls. Overall height is 1900 mm on a 1000 mm width. A perfume display shelf this open shows bottles from two sides. It also reads from the aisle end.

Board, Metal and Light

The cabinet is 18 mm MDF with a white matte laminate. Posts are 20 mm steel tube with a brushed gold finish. Tiers are 20 mm board with a white face and a slim gold edge. LED strips run at 6 W per tier, 4000 K, fed from a driver in the drawer bank. Drawers run on ball sliders with soft close. Weight is 86 kg. A perfume display shelf built this way carries 12 kg per tier.

Fragrance Floor Layout

Place the unit against a wall or on a plinth, 900 mm from the next fixture. Keep the top tier at 1700 mm for a standing read. Group bottles by family across one tier, so a shopper scans a line. The open back lets a wall colour show through. Two units flank a mirror for a fragrance bar. A perfume display shelf also suits a cosmetics aisle or a hotel lobby. One perfume display shelf fills a 1 m bay. Compare retail shelving bays or wall fixtures wall panels.

Specification Detail
Dimensions 1000 x 450 x 1900 mm
Cabinet 18 mm MDF, white laminate
Posts 20 mm steel, brushed gold
Tiers 3, 12 kg each
Lighting LED edge, 6 W per tier, 4000 K
Drawers 4, ball slider, soft close
Weight 86 kg

Stock and Service

Four drawers hold back stock under the display, so staff restock without a trip. Each drawer takes 15 kg and closes flush. The work top gives a space for a tester tray and a tissue box. Cables run up the left post behind a cover. A perfume display shelf keeps bottles off a shared counter. Wipe the laminate weekly and dry the gold with a soft cloth. A perfume display shelf set at 1900 mm clears a low ceiling.

Delivery and Fit Out

The unit ships in three cartons: cabinet, posts and tiers. Two people build it in about 50 minutes. Set the cabinet level, bolt the posts, then hang the tiers from the top down. The LED plug sits at the rear of the top. Weight is 86 kg. Level the feet before loading bottles. store operations teams check the tier brackets each quarter. store display planning covers aisle plans beside a fragrance bay.

Cost and Custom Build

Three open tiers hold about 60 bottles in a narrow slot. Edge light lifts a glass bottle without a shop spotlight. The drawer bank keeps the floor clear of boxes. Gold on white suits a clean cosmetics look. A single unit fills a wall gap that a full cabinet would crowd. List price starts at USD 720 for the 1000 mm unit. Ukiosks builds this perfume display shelf in any width, tier count and finish. Our team quotes from a drawing. Browse retail displays for floor pieces, or send a plan through our contact page.

Reviews

There are no reviews yet.

Be the first to review “Perfume Display Shelving with LED Lights, 1000 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop