UniqueKiosk · Shenzhen workshop

Wine Pedestal Glass Display Case with LED Light, 400 mm

$980.00

A pedestal wine display case with a glass vitrine, a lit gold back panel and an open lower bay. Price range: USD 300-1,500, set by size and light.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Glass Box on a Frame

This wine display case puts one bottle inside a glass vitrine at eye height. A gold frame holds the case above an open lower bay. A gift box or a second bottle sits down there. The vitrine measures 400 mm square and 500 mm tall. A lit plinth holds the bottle at the centre. The whole unit stands 1500 mm from the floor. A 1500 mm height puts the label at eye line, and a wine display case reads from the aisle.

Glass and Metal

The vitrine uses 6 mm tempered glass on four sides with a sliding front panel. The frame is 20 x 20 mm steel tube with a brushed gold finish. Inside, a fluted gold panel sits behind the bottle. A black quilted band caps the pedestal. The base is steel with four adjustable feet. Weight is 46 kg, so a wine display case moves on a trolley before the glass goes in. A wine display case built this way reads solid at the base and light at the top.

Light and Lock

Two warm LED strips sit behind the fluted panel and wash the back of the bottle. Output is 9 W at 3000 K, run from a 12 V driver in the lower bay. A cam lock secures the sliding glass panel. The plinth carries 8 kg, enough for one bottle and a stand. Cable entry sits at the base, so no wire shows. A wine display case with back light lifts a label without a shop spotlight. The fluted panel spreads the beam, so a wine display case shows no hot spot on the glass.

Specification Detail
Dimensions 400 x 400 x 1500 mm
Glass 6 mm tempered, 4 sides
Frame 20 x 20 mm steel, brushed gold
Lighting 2 LED strips, 9 W, 3000 K
Vitrine 400 x 400 x 500 mm
Lock cam lock, sliding panel
Weight 46 kg

Where It Stands

Set the case on a plinth or a bare floor near a wine wall. Keep 800 mm clear in front so a shopper can read the label. The 400 mm footprint fits a narrow aisle gap. Two cases flank a doorway as a pair. Give the lit face a dark wall and the bottle will read sharp. A wine display case works in a bottle shop, a hotel lobby or a tasting room. Compare display cases sizes or countertop displays bench pieces.

Delivery and Setup

The case ships in two cartons: frame and glass apart. Two people build it in about 40 minutes. Set the base and pedestal first, then bolt the vitrine. Glass panels slide in from the top rail. The driver connects to a 12 V supply below. Weight is 46 kg, so a wine display case moves on a trolley before the glass goes in. Clean glass with a non ammonia spray. store operations teams check the lock and the strips each month. store display planning covers floor slots beside a wine wall.

Cost and Custom Build

One bottle in a lit glass box draws more attention than six on a shelf. The open bay keeps a gift box at hand. Gold, black and glass read warm under 3000 K light. A single pedestal fits a floor slot too narrow for a cabinet. List price starts at USD 980 for the 400 mm case. Ukiosks builds this wine display case in any height, glass size and metal finish. Our team quotes from a drawing. Browse retail displays for island cases, or send a plan through our contact page.

Reviews

There are no reviews yet.

Be the first to review “Wine Pedestal Glass Display Case with LED Light, 400 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop