UniqueKiosk · Shenzhen workshop
Rotating Jewelry Display Stand, 400 mm Square
$420.00
A square rotating jewelry display stand with four pegboard faces, gold trim and a header panel. Price range: USD 50-300 plus finish, set by height.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Four Faces on One Base
This jewelry display stand carries stock on four faces from a 400 mm square base. The tower turns on a bearing ring, so a shopper spins it without asking staff. Four rows of pegs hold carded necklaces or earrings. A header panel sits above on a gold post. The stand stands 1500 mm tall with the panel. One unit shows about 120 cards on a narrow floor slot. A spinner jewelry display stand also suits a market stall. A jewelry display stand like this fits where a counter cannot.
Pegboard and Trim
Faces are 16 mm MDF with a white laminate and a punched hole grid at 25 mm pitch. Pegs are 6 mm steel with a chrome finish. The top rail and base trim are brushed gold steel. The header panel is 18 mm board with a black laminate face. Base plates are 22 mm board with a white face and a gold edge. Weight is 42 kg, so a jewelry display stand of this size stays put on tile. A white face shows the cards, not the fixture.
Turn and Hold
The tower sits on a 300 mm bearing ring rated for 60 kg. A friction brake stops it from drifting after a shopper lets go. The base plate adds 30 kg of ballast, so the stand cannot tip when loaded on one face. Pegs pull out for a reset and drop back in. Each face can hold a different collection. A jewelry display stand with a brake keeps its front face square to the aisle.
| Specification | Detail |
|---|---|
| Dimensions | 400 x 400 x 1500 mm |
| Faces | 4 pegboard faces, 25 mm pitch |
| Body | 16 mm MDF, white laminate |
| Trim | brushed gold steel rail and base edge |
| Rotation | 300 mm bearing ring, brake |
| Weight | 42 kg with ballast |
| Header | 18 mm board, black laminate |
Store Placement
Put the stand 900 mm from a wall so a shopper can circle it. Keep it clear of a doorway, since the swing takes 500 mm. Two stands work as a pair at the end of a counter run. Keep the header panel below 1600 mm so it stays in view. A jewelry display stand suits a mall kiosk, a boutique corner or a market stall. Compare jewelry displays layouts. store display planning covers planogram practice for the same slot.
Delivery and Setup
The stand ships in one carton with the tower, base and panel apart. One person builds it in about 25 minutes. Bolt the base plate first, then set the bearing ring and tower. Pegs go in by hand with no tools. Weight is 42 kg in total. Wipe the laminate with a damp cloth and check the brake each month. A jewelry display stand set on tile needs the feet checked once a year. store operations teams re-hang cards after a stock change. retail displays covers floor plans before the stand is placed.
Cost and Custom Build
A spinner turns one square metre into four selling faces. Carded stock stays visible from every side of the aisle. The brake holds the face square, so the display always reads clean. A gold trim lifts the look without a glass case budget. List price starts at USD 420 for the 1500 mm unit. Ukiosks builds this jewelry display stand in any height, peg pitch and trim finish. Our team quotes from a drawing. Browse countertop displays for bench trays, or send a layout through our contact page.
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Polish Display Cabinet, Two Bays with LED Shelf Strips
Price:
Skincare Display Cabinet, Black Frame 2 m with Glass Cases
Price:
Marble-Base Double Rail Garment Rack, Gold 1.2 m
Price:








Reviews
There are no reviews yet.