UniqueKiosk · Shenzhen workshop

Pharmacy Prescription Cabinet with 35 Drawers, 1800 mm

$1,350.00

A wall bank prescription cabinet with 35 lockable drawers and hex dividers for medicine packs. Price range: USD 700-1,500, set by drawer count and finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Thirty-Five Drawers

This prescription cabinet packs 35 drawers into a 1800 mm wall bay. Five columns run seven rows high. Each drawer is 320 mm wide and 120 mm tall, enough for a week of one line. A curved groove at the top of the face pulls the drawer open without a handle. The unit reads as a flat wall until a drawer moves. Staff find a line by row and column. A prescription cabinet of this size also keeps stock off the floor.

Laminate Build

Faces are 18 mm MDF with a beige melamine laminate and a soft edge band. Each prescription cabinet drawer rides on four steel rollers. The carcass uses 18 mm board with a white laminate face inside. Drawers run on steel ball-bearing rails and carry 12 kg each. The face laminate is pressed flat, so a prescription cabinet keeps an even front. A recessed plinth keeps the bottom row clear of a mop. Weight is 140 kg for the full bank. Every prescription cabinet is levelled at the wall before the first drawer goes in. A level base keeps all 35 drawers closing on one touch.

Dispensing Workflow

A drawer opens to a white hexagonal divider grid. Packs drop into the cells and stay upright. The grid lifts out, so one drawer can switch from boxes to bottles in seconds. Locks are keyed alike per bank, and a master key covers several banks. Staff pull the drawer at hand height and read the whole grid at once. A prescription cabinet set this way shortens the walk between pick and till. That saves a step on every script.

Specification Detail
Dimensions 1800 x 600 x 2150 mm
Drawers 35, five columns of seven
Faces 18 mm MDF, beige melamine
Drawer load 12 kg each
Locking keyed alike per bank
Weight 140 kg
Base recessed plinth, 100 mm

Behind Counter Fit

The plinth lifts the bank 100 mm off the floor. Leave a 1500 mm clear strip in front of it. Fix the top row to the wall with the strap in the carton. Depth is 600 mm, which clears most counters with a 900 mm aisle. Keep the top two rows for fast movers and the bottom rows for bulk. A prescription cabinet works beside store operations stations and a counters and cash wraps till point.

Delivery and Setup

The cabinet ships in two crates, carcass and drawers apart. Two people stand it in about 90 minutes. Drawers slide in on their rails without tools. Feet adjust by 15 mm for tiled floors. Check each row after loading, since a heavy top row pulls the frame square. retail shelving covers wall bays that hold stock in the same room. Check store display planning before you set counter heights for the bay.

Cost and Custom Build

Where space is tight, a wall of drawers beats a room of shelving. One bank puts 35 lines within arm reach of a single stool. Hex dividers keep packs upright through a busy day. Laminate faces wipe clean and hide scratches. List price starts at USD 1,350 for the 1800 mm bank. Ukiosks builds this prescription cabinet in any width, row count and laminate colour. Our team quotes from a drawing. Compare display cases for glazed units, or send sizes through our contact page.

Reviews

There are no reviews yet.

Be the first to review “Pharmacy Prescription Cabinet with 35 Drawers, 1800 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop