UniqueKiosk · Shenzhen workshop

Brume Legged Glass Jewelry Display Case, 450 mm

$1,180.00

A legged jewelry display case with a glass cube top, white interior and a necklace bust. Price range: USD 700-1,500, set by size and finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Case on Four Legs

This jewelry display case stands on four tapered legs. The glass cube sits at counter height, so a customer looks down into it. A white floor panel lifts the stone colour. One necklace bust fills the cube without crowding it. The frame is slim, and that keeps the focus on the piece inside. A jewelry display case with legs leaves the floor open below, so a second unit can sit beside it. Shops that plan with jewelry displays often pair two of these.

Glass and Frame Build

The cube uses 6 mm tempered glass on four sides and the top. Edges are polished, so the corners read clean under spot light. The frame is 1.2 mm steel, powder coated matte black. Legs bolt into a steel plate under the cube and carry 60 kg each. A latch lock hides inside the rear rail. Any jewelry display case in this range shares the same frame system. Similar glass display cases keep parts available for years.

Light and Sight Lines

Glass passes light from the room straight into the cube. A small LED puck can be fitted under the top panel. The puck runs at 3000 K and draws 6 W. Height is 1050 mm, which puts the cube at chest level for most shoppers. That angle shows the setting of a ring or pendant well. The height also keeps stock inside the staff sight line. A countertop display case like this suits a small floor plate.

Specification Detail
Dimensions 450 x 450 x 1050 mm
Glass 6 mm tempered, polished edges
Frame 1.2 mm steel, matte black powder coat
Interior white floor panel, one necklace bust
Load 60 kg per leg
Lock hidden latch lock, rear rail
Weight 34 kg

Where Shops Use It

Jewellers place this jewelry display case beside a main counter. A second jewelry display case holds watches at the other end. Pawn shops use it for watches and chains. Bridal studios put one near the fitting room. Pop-up stalls take it because it breaks down into a cube and four legs. Two units make a small feature wall. The layout follows store display planning. The footprint is 450 by 450 mm, so it fits a narrow aisle without blocking traffic.

Care and Handling

Clean the glass with a dry microfibre cloth and a mild spray. The black frame needs no polish. Legs unscrew for transport, and the cube packs into one carton with foam corners. Assembly takes about 15 minutes. Weight is 34 kg. One person can move this jewelry display case alone. That suits markets and trunk shows that set up weekly.

Why It Pays Back

A glass cube at eye level sells the piece, not the shelf. Stock stays locked, so staff handle less. The simple frame costs less than a full counter. A jewelry display case built this way also ships flat, which lowers freight. List price starts at USD 1,180 for the 450 mm cube. Ukiosks builds this jewelry display case in any cube size, leg height and frame colour you need. Our team quotes from a drawing. See more retail displays, or send a brief through the contact page.

Reviews

There are no reviews yet.

Be the first to review “Brume Legged Glass Jewelry Display Case, 450 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop