UniqueKiosk · Shenzhen workshop
Lynx Oak Wood Jewellery Showcase Counter, 1500 mm
$1,450.00
An oak wood jewellery showcase counter with a glass top case, three drawers and black steel legs. Price range: USD 600-2,500, set by length and finish.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Oak Below, Glass Above
This jewellery showcase counter pairs a clear glass top case with an oak drawer bank. The wood base warms a white jewellery floor, which most glass counters cannot do. A jewellery showcase counter of this length serves two clients at one time. Total height is 950 mm, so trays sit at waist level. The case is 1500 mm long and takes four velvet trays. Staff reach stock from three drawers below. That saves a walk to the back room. Case layout follows our jewellery display guide.
Case and Deck
The top case is clear glass, 6 mm tempered, with a white deck and a low front lip. A jewellery showcase counter needs a bright deck, so diamonds and gold read true under spot light. Deck load is 40 kg, enough for trays plus a small mirror. Glass edges are polished, and the corners take a 3 mm chamfer. The glass is cut so the front panel lifts for tray changes. Glazing follows our display case spec.
Drawer Bank and Legs
The drawer bank is oak veneer over 18 mm board, with three drawers at 400 mm wide. A jewellery showcase counter needs shallow drawers with soft close slides, since trays shift when pulled fast. Each drawer takes a black pull handle and a hook lock. A white laminate band runs above the drawers at 80 mm. The base sits on a black steel frame with a cross brace. That brace keeps the long span flat. Handle stock follows our retail counter range.
| Specification | Detail |
|---|---|
| Overall size | 1500 W x 600 D x 950 H mm |
| Case | Clear glass top, 6 mm tempered, white deck |
| Cabinet | Oak veneer drawer bank, three drawers |
| Band | White laminate top band, 80 mm |
| Legs | Black steel frame with cross brace |
| Drawers | 400 mm wide, black pull handles |
| Load | 40 kg on the case deck |
Placement and Care
Set the counter 800 mm from a wall so staff can pass behind. A jewellery showcase counter with a wood base also needs a dry floor, since oak veneer marks if water sits. Keep the case under a 3000 K spot at 12 W. Wipe the glass with a non ammonia cleaner, and dust the oak with a dry cloth. Check the cross brace bolts every six months. The counter weighs about 120 kg and ships on one pallet. Leg frames match our store fixtures steel list.
Where It Sells
The unit suits jewellery stores, watch shops, duty free corners and hotel boutiques. A jewellery showcase counter in oak also suits a warm interior. It pairs well with wood shelving and warm light. Pair it with a wall for the main range. Add a tower for high value pieces, and keep the counter end free for packing. Trays follow our jewellery display range.
Price and Build Notes
A jewellery showcase counter at this length lists at USD 1,450 with three drawers. Price moves with length, wood finish and drawer count. The wood base sets it apart from all glass counters, which helps in a boutique with a warm palette. Our Shenzhen factory builds this jewellery showcase counter to your length and veneer colour. Case stock follows our display case line, and wood work matches our store fixtures build. Send the store plan through contact us for a quote.
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Polish Display Cabinet, Two Bays with LED Shelf Strips
Price:
Skincare Display Cabinet, Black Frame 2 m with Glass Cases
Price:
Marble-Base Double Rail Garment Rack, Gold 1.2 m
Price:








Reviews
There are no reviews yet.