UniqueKiosk · Shenzhen workshop

Kettle White Wood Coffee Kiosk with Glass Case, 2200 mm

$10,500.00

An L shaped coffee kiosk with a white counter, dark wood front band and a lit glass pastry case. Price range: USD 9,000-15,000, set by size and equipment.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Two Counters, One Footprint

This coffee kiosk packs a service counter, a pastry case and a back work wall into one L shape. The long side faces the queue and carries the lower serving counter. The short side holds the glass case and the sink. A coffee kiosk laid out this way keeps the barista inside one circle of reach. Total footprint is 2200 mm by 1600 mm. The unit needs one power feed and one drain point. Layout follows our mall retail kiosk guide.

Counters and Finish

The body is 18 mm plywood with a white laminate face and a dark walnut front band. A coffee kiosk needs a band at knee height, since white panels show every shoe mark. The worktop is a grey marble look compact top at 900 mm. The lower serving counter sits at 750 mm, so cups pass over it easily. An LED strip runs under the band and lights the floor line at night. Front bands match our retail counter finish list.

Case and Back Wall

The glass case has a hinged lid and three trays, sized for pastries and sandwiches. A coffee kiosk with a lit case sells food next to the drinks, which lifts the average ticket. Glass is 8 mm tempered with a stainless frame. The back wall is a walnut panel with one steel shelf for the grinder and cups. A small sink sits at the right end for cleaning. Case trays match our display case tray set.

Specification Detail
Overall size 2200 W x 1600 D x 1200 H mm
Counter body 18 mm plywood, white laminate finish
Front band Dark walnut laminate, LED base strip
Worktop Grey marble look compact top
Glass case Hinged lid, 8 mm tempered, three trays
Back unit Wood panel wall with steel shelf
Power LED strip 24 V, one feed

Service and Cleaning

The counter height suits a standing barista. There is 900 mm to the worktop and 750 mm to the pass. A coffee kiosk in a mall also needs a wipe down routine, so all faces are laminate rather than paint. The glass case lifts off its hinges for a full clean. Cable and drain runs stay inside the back wall. The base sits on adjustable feet with a 15 mm gap. Feet and rails follow our store fixtures list.

Where It Sells

The unit suits mall food halls, office lobbies, airports and hospital concourses. A coffee kiosk of this size also works in a supermarket entrance. A short menu fits the smaller bay. Pair it with a permit plan drawn by your mall agent. Add a small shelf for beans and cups, and keep 1200 mm for the queue. That gap also fits a bin and a card stand.

Price and Build Notes

A coffee kiosk at this size sells for USD 10,500 as a counter shell. Price moves with length, case size and equipment. The L plan gives one operator a full service line in a small mall bay. Our Shenzhen factory builds this coffee kiosk to your bay size and counter height. Shell details follow our retail counter build, and cases match our display case glazing. Send the bay plan through contact us for a quote.

Reviews

There are no reviews yet.

Be the first to review “Kettle White Wood Coffee Kiosk with Glass Case, 2200 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop