UniqueKiosk · Shenzhen workshop

Noor Smoked Glass Clothing Rack, 1000 mm

$760.00

A clothing rack with arched smoked glass side panels, a white hangrail and a bronze floor frame. Price range: USD 400-1,200, set by glass finish and width.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Glass Sides Instead of Posts

Most clothing racks end in two steel posts. This one uses two glass panels. Both sides are 10 mm smoked grey glass with an arched top, edged in bronze. A clothing rack with glass sides reads lighter in a small room. The glass also blocks the view through the rack, so a garment sits against a tinted background. Two panels and one rail are the whole structure. That leaves the rail open on both sides for hanging space.

Glass and Frame

The panels are 10 mm toughened glass, arched at the top and fixed to a bronze steel floor frame. A clothing rack with glass sides needs a base that carries the load, since the glass is not the structure. The floor frame has a 60 mm skirt and four levelling feet. The rail is a 32 mm white steel tube, fixed through both panels. Clear span is 920 mm, which follows our retail display rail spacing.

Rail and Load

The rail sits at 1350 mm, which suits dresses, coats and long shirts. A clothing rack at this height keeps hems off the floor by 100 mm. The rail carries 40 kg, or about 25 winter coats. Weight goes to the floor frame, not the glass. Keep heavy items toward the middle of the rail. The white rail shows against the smoked glass. Rail joints follow our retail shelving steel stock.

Specification Detail
Overall size 1450 H x 1000 W x 400 D mm
Side panels 10 mm smoked grey glass, arched
Edge trim Bronze stainless, 5 mm
Hangrail 32 mm white steel tube
Floor frame Bronze steel, 60 mm skirt
Clear rail span 920 mm
Load 40 kg on the rail

Placement and Light

Place the rack where a light source sits to one side, so the glass edge glows. A clothing rack with tinted glass looks flat under direct top light. Keep 400 mm between the rack and a wall, so the glass reads as a panel. A clothing rack bay also needs 900 mm of aisle in front. The rack weighs 38 kg, and two people move it. Clean the glass with a non-ammonia cleaner to protect the bronze trim. A store fixtures plan should also note the floor slope at the spot.

Where It Fits

The unit suits boutiques, bridal rooms, hotel lobbies and design studios. A clothing rack with glass sides also works in a window display. There the tint frames the product against street light. Pair it with a steel rail run for stock. Add a low table for folded items, and keep the glass rack as the single feature piece. Wide bays suit two racks, but one tinted pair already holds attention.

Price and Build

List price is USD 760 for the 1000 mm clothing rack with smoked glass sides. Price moves with glass tint, panel height and rail length. The glass sides give the rack a quiet look, and the bronze base keeps it grounded. Our Shenzhen factory builds this clothing rack to your panel shape and glass tint. Panel detail follows our display case glazing line, and the rail matches our store fixtures stock. Send the panel drawing through contact us for a quote.

Reviews

There are no reviews yet.

Be the first to review “Noor Smoked Glass Clothing Rack, 1000 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop