UniqueKiosk · Shenzhen workshop

Beacon Black Steel Clothing Display Rack with Shelves, 900 mm

$620.00

An open black steel clothing display rack with two lit shelf rails, a hanging rail and a wood lower deck. Price range: USD 250-800, set by size and shelf count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

One Rack, Two Jobs

A clothing display rack can hang stock and hold folded stock at the same time. This unit has a hanging rail across the middle and two lit shelves above it. The lower deck takes shoes, boxes or folded knitwear. A clothing display rack with both zones saves aisle space in a small shop. The frame is open, so a customer sees the stock from the side as well. The open look follows our retail display range.

Steel Frame and Joints

The frame is 30 mm square steel tube, welded at every corner. Uprights are 60 mm apart from the shelf edge, so a suit does not brush the steel. Two LED shelf rails carry 15 kg each, and the hanging rail carries 40 kg. A clothing display rack needs that split load for suits and coats. A clothing display rack of this weight needs a firm joint. Powder coating is 80 micron matt black, baked at 180 C for a hard finish.

Lighting on the Rails

Each shelf rail holds a 12 W LED strip at 4,000 K. Light points down, so it falls on the shoulders of a jacket. A clothing display rack with lit shelves shows wool and cashmere without a colour cast. The strips run on a 24 V driver inside the base frame. A wall bay with these rails also suits our wall fixtures. A shop plugs the rack into one socket, and the driver feeds both rails.

Specification Detail
Overall size 1900 H x 900 W x 500 D mm
Frame 30 mm square steel tube, powder-coated black
Shelves Two LED shelf rails, 15 kg each
Hanging rail Steel tube, 40 kg load
Lower deck 18 mm wood board, walnut finish
Lighting LED rail, 12 W, 4,000 K per shelf
Weight 46 kg per rack

Deck and Detail

The lower deck is 18 mm wood board with a walnut face. It sits 120 mm above the floor, which leaves room for a shoe row. A clothing display rack with a raised deck keeps hems off a dusty floor. The deck board lifts out for cleaning, and a fitter can swap it for a white laminate top. Base feet are adjustable by 8 mm for uneven shop floors. Deck height follows our shelving levels.

Where It Fits

The rack suits suit shops, boutiques, hotel uniform stores and showrooms. It also works as a wall bay in a mall unit. A clothing display rack at 900 mm wide fits two per 2,000 mm wall run. Keep 900 mm of aisle in front for a customer to step back. Pair the rack with a clothing rack rail for extra hanging space.

Price and Build

List price is USD 620 for the 900 mm rack with two lit rails. Price moves with shelf count, frame colour and deck finish. The steel frame carries the load, and the lit rails lift wool and dark suits. Our Shenzhen factory builds this clothing display rack to your bay width and shelf plan. A clothing display rack in a white frame ships on the same lead time. Steel detail follows our store fixtures spec. Send the wall drawing through contact us for a layout.

Reviews

There are no reviews yet.

Be the first to review “Beacon Black Steel Clothing Display Rack with Shelves, 900 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop