UniqueKiosk · Shenzhen workshop

Knoll White Shampoo Backwash Unit, 1200 mm, Ceramic Basin

$1,900.00

A salon backwash unit with a moulded chair, ceramic basin and chrome mixer tap. Price range: USD 600-2,500 per unit, set by basin and base type.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Chair and Basin Together

A backwash unit puts the basin and the client seat on one base. This unit is 1,200 mm long, 620 mm wide and 960 mm high at the basin rim. The chair is moulded in one piece, with squared armrests and a raised back. A backwash unit of this length fits a 1.4 m salon bay with room to walk behind. One unit serves one stylist and one client at a time.

Basin and Plumbing

The basin is white vitreous china, 520 mm wide and 300 mm deep, set at 960 mm. A single-lever chrome mixer runs hot and cold, and the spout clears the basin lip by 150 mm. A backwash unit needs a 40 mm waste and two 15 mm supply lines, both offset behind the chair. A spray head can replace the mixer. China grade matches a commercial basin, not a domestic sink. Tap kits ship with our retail shelving orders too.

Base and Recline

The base is a moulded pedestal with a flat foot plate and four anchor points. A backwash unit carries about 180 kg with a client seated. The plate spreads that load on a timber floor. The chair back reclines 20 degrees on a manual latch, and a footrest folds out. Neck support sits at the basin rim. Base builds follow our store fixtures moulding.

Specification Detail
Unit size 1200 L x 620 W x 960 H mm
Basin White vitreous china, 520 x 300 mm
Tap Single-lever chrome mixer, hot and cold
Base Moulded pedestal, 4 anchor points
Recline Manual latch, 20 degrees
Upholstery White vinyl, 40 mm foam
Plumbing 40 mm waste, two 15 mm supplies

Upholstery and Finish

Seat and back are 40 mm foam on a moulded shell, faced in white vinyl at 1.0 mm. A backwash unit gets wet every day, so the vinyl takes a bleach-free salon cleaner. Seams are stitched, not glued, and the shell drains through a slot at the base. White gel coat on the pedestal resists hair dye. Vinyl grade follows our retail displays finish spec and sits flat like a countertop display tray.

Where It Fits

The unit suits salons, barber shops, hotel spas and home studios. A backwash unit needs 600 mm behind the basin for the stylist to stand and reach the tap. Keep the water heater within 10 m, so hot water reaches the basin in two litres. Two units side by side need 2.6 m of wall. Pair the basin wall with a reception counter at the front.

Why This Unit Works

A backwash unit keeps wash, rinse and towel service in one footprint. The ceramic basin holds heat, and the moulded chair drains water away from the client. A manual recline and a folding footrest handle most neck lengths without a motor. List price starts at USD 1,900 for the 1.2 m unit with basin, tap and chair. Our Shenzhen factory builds backwash units with your basin size and base layout, and ships them as one piece. Send the salon bay plan through contact us, and we set the waste position.

Reviews

There are no reviews yet.

Be the first to review “Knoll White Shampoo Backwash Unit, 1200 mm, Ceramic Basin”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop