UniqueKiosk · Shenzhen workshop

Spruce White Gondola Shelving Run, 3 Bays, 3000 mm

$680.00

A three-bay wall gondola shelving run with four adjustable shelf levels and a base deck. Price range: USD 150-800 per unit, set by bay count and shelf depth.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Three Bays of Wall Space

This gondola shelving run joins three bays into one wall unit. Each bay is 1,000 mm wide and 450 mm deep. Height is 1,400 mm, so the run is 3,000 mm long. Four shelf levels sit above a base deck, which gives five display rows per bay. A retailer fills fifteen rows with one 3 m wall. The run stands alone against a wall, so a shop keeps floor space in front.

Steel Frame and Shelves

Uprights are 40 x 80 mm steel tube with a slotted pitch, and back panels are 0.6 mm steel. Shelves are 0.7 mm steel with a folded front edge, and each holds 80 kg spread load. A gondola shelving run carries heavy tins and bottles without sag. The frame bolts together, and a bay takes about twenty minutes to erect. A shop builds these rows like any retail display wall. Steel grades match our retail shelving range.

Shelf Pitch and Depth

Brackets step on a 50 mm slot pitch, so a shelf moves up or down in one minute. Each bay can take two depths at once, 300 mm up high and 450 mm at the base. A gondola shelving run with mixed depth holds tall cartons on the top and bulky packs at the bottom. Price strips clip to the front edge of every shelf. Depth options follow our store fixtures build.

Specification Detail
Run size 3000 W x 450 D x 1400 H mm
Bays 3 bays, 1000 mm each
Shelves 4 levels plus base deck, 50 mm pitch
Shelf load 80 kg spread per shelf
Frame 40 x 80 mm steel uprights, 0.6 mm panels
Finish Powder coat white RAL 9010, 60 micron
Anchoring Steel foot plates, 6 floor bolts

Finish and Anchoring

Panels and shelves take a powder coat in plain white, RAL 9010. The coat is 60 microns and resists a damp mop. Feet are steel plates with two bolt holes per upright, and a run needs six bolts to a solid floor. A gondola shelving run must be anchored, since a loaded bay leans forward. A shop fitter sets the bolts before stock goes on. Anchor detail matches our wall fixtures spec.

Where It Fits

The run suits convenience stores, pharmacies, pet shops and hardware aisles. A gondola shelving run needs 1,200 mm of aisle in front for a trolley to pass. Keep the top shelf under 1,400 mm, so a customer sees the whole wall from the aisle. Power is not needed unless a strip light goes under a shelf. A run of six bays fills a 6 m wall, and a second gondola shelving run doubles the aisle length. Pair the wall with a cash wrap counter near the door.

Why This Run Works

A gondola shelving run turns a plain wall into fifteen selling rows. The slotted uprights let a fitter re-space shelves when a planogram changes. Steel shelves carry heavy stock, and the white coat keeps a small shop bright. List price starts at USD 680 for the three-bay run with four shelf levels. Our Shenzhen factory builds gondola shelving bays to your wall length and shelf depth. Send the bay count and the planogram through contact us, and we set the upright pitch.

Reviews

There are no reviews yet.

Be the first to review “Spruce White Gondola Shelving Run, 3 Bays, 3000 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop