UniqueKiosk · Shenzhen workshop

Mist White Handbag Display Cabinet, Glass Shelves, 1200 mm

$1,450.00

A white handbag display cabinet with a glass top, two adjustable glass shelves and a locking rear door. Price range: USD 300-1,500, set by size and lighting.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Bags Behind Glass

A handbag display cabinet keeps stock clean and in view. This unit is 1,200 mm wide, 600 mm deep and 1,200 mm high. Two glass shelves split the interior into three bands, which suits a row of bags per shelf. The rear door slides, so a seller reaches stock from behind the counter. A boutique with six linear metres of wall fits four of these cabinets. One handbag display cabinet holds about 12 mid-size bags.

Carcass and Glass

The carcass is 18 mm white melamine on a honeycomb core. A glass top and glass sides close the box, so a buyer reads the shelf from any angle. Shelves are 8 mm tempered glass, held on steel brackets. Each shelf takes 25 kg, which covers a full row of leather bags. A handbag display cabinet with a glass top shows dust at once, so staff wipe it daily. Case frames follow our display cases build.

Shelf Spacing and Locks

Shelf brackets move on a 32 mm pitch, so spacing changes in a minute. Track gauge follows our retail shelving system. A tall tote needs 380 mm, and a clutch needs 180 mm. The rear door carries a cam lock with two keys. A handbag display cabinet in a shared mall needs that lock, since stock sits near the walkway. A white plinth lifts the base 120 mm off the floor and hides the door track. Our store fixtures share that plinth detail.

Specification Detail
Overall size 1200 W x 600 D x 1200 H mm
Carcass 18 mm white melamine, honeycomb core
Glass 8 mm tempered top, sides and shelves
Shelves 2 adjustable, 32 mm pitch, 25 kg each
Door Sliding rear door with cam lock
Lighting LED strip under each shelf, 4000 K
Plinth 120 mm white, hides door track

Lighting and Finish

An LED strip clips under each shelf, aimed down at the bag below. The strip runs at 4,000 K, which keeps leather colour true. Cables run in the side wall, and one plug feeds the cabinet. A handbag display cabinet with warm light lifts a tan bag against white. Matte white laminate hides fingerprints better than gloss. Light strips match the ones on our retail displays range.

Where It Fits

Place the cabinet against a wall or at the end of a gondola run. A handbag display cabinet needs 900 mm in front for a buyer to step back and read a bag. Keep it out of direct sun, since glass heats the inside and dries leather. A store with a low ceiling still fits this 1.2 m height under a shelf line. Pair it with a countertop display for small leather goods.

Why This Cabinet Works

A handbag display cabinet protects stock and shows it at the same time. The glass box reads from three sides, and the shelves change height in minutes. The lock and the plinth suit a busy mall walkway. List price starts at USD 1,450 for the 1.2 m unit with lights. Our Shenzhen factory builds handbag display cabinet shells to your wall length and shelf count. Send the bag sizes and the light plan through contact us, and we set the bracket pitch.

Reviews

There are no reviews yet.

Be the first to review “Mist White Handbag Display Cabinet, Glass Shelves, 1200 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop