UniqueKiosk · Shenzhen workshop

Sable Stainless Steel Food Cart with Striped Canopy, 2000 mm

$4,200.00

A mobile stainless steel food cart with a glass display case, a worktop and a striped canopy. Price range: USD 2,400-5,200, set by size and equipment.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

A Shop on Two Wheels

A food cart lets one seller open a pitch in the morning and close it at night. This unit is 2,000 mm long, 900 mm deep and 2,100 mm high. Two wheels carry the load and a steel leg keeps the cart level. The body holds stock, and the top holds the work surface. One person tows the cart at walking pace on a flat pitch. Market sellers and event caterers use the same food cart for a full season.

Stainless Body and Doors

The body is welded from 201 grade stainless sheet of 1.0 mm. Doors close on a steel frame, and each door has a magnetic catch. A folding side shelf adds 300 mm of worktop on both ends. The stainless face wipes clean and takes a daily wash without rust. A food cart with a welded body keeps stock dry in rain. Steel shelves inside follow our retail shelving gauges. The sheet gauge follows the same rule as our store fixtures metalwork.

Glass Case and Worktop

A glass display cabinet sits above the worktop, split into two shelves. Each shelf carries cups, packets or bottled drinks in view of a queue. The glass is 5 mm tempered, and the ends close with stainless trim. A worktop runs under the case at 900 mm, with a lip to stop spills. A food cart needs the case at eye level, so a buyer reads stock without bending. Case frames match our display cases build.

Specification Detail
Overall size 2000 L x 900 D x 2100 H mm
Body 201 stainless, 1.0 mm welded sheet
Cabinet 3 doors with magnetic catches
Glass case 5 mm tempered, 2 shelves
Worktop Stainless, 900 mm high, with lip
Canopy 600 g coated polyester on 4 posts
Running gear 2 wheels, 1 levelling leg

Canopy and Setup

A striped canopy spans the top on four steel posts. The fabric is a 600 g coated polyester, and it clips to the frame with straps. The canopy shades the worktop and hides a lamp for evening sales. Poles come apart in three sections for transport. A seller sets the food cart up in about 20 minutes, with two people on a heavy pitch. Our mall kiosks use the same post and canopy detail.

Where It Sells

The cart suits a market lane, a park path or an event field. It needs a flat surface, and a slope below 3 percent keeps the worktop level. Keep 1,000 mm free at the serving side for a queue. Power comes from a small generator or a battery box under the cabinet. A food cart with a glass case sells snacks, drinks, crepes and cold food. Pair it with a nearby cash wrap counter at a fixed market hall.

Why This Cart Pays

A food cart keeps stock, case and canopy on one frame. A seller moves it without a van, and the stainless body lasts for years of daily washing. The folding shelves give extra worktop in seconds. List price starts at USD 4,200 for the 2 m cart. Our Shenzhen factory builds food cart bodies to your length and shelf count. Send the pitch size and the case layout through contact us, and we cut the stainless panels for the run.

Reviews

There are no reviews yet.

Be the first to review “Sable Stainless Steel Food Cart with Striped Canopy, 2000 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop