UniqueKiosk · Shenzhen workshop

Plum Cafe Service Counter with Wood Slat Front and Glass Pastry Case, 3200 mm

$2,200.00

Cafe counter in wood slat board with a stone top, an inset glass pastry case and a brass foot rail. Price range: USD 2200-4500, set by length and case set.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Counter Form

This cafe counter runs 3200 mm long and 1000 mm tall. A cafe counter of this size fills a shop front run of 3.2 m. The top holds a till and a grinder, so a barista works at one line. A glass case sits at the right, so pastry sells beside the till. A rounded end closes the run, so a customer walks past clean. One counter serves a queue of six. A food kiosk plan sets the run.

Slat and Stone

The body builds from 18 mm board with a wood slat face on a steel frame. A cafe counter in this build takes a daily wipe with no stain. The top runs a stone sheet, so a hot cup leaves no ring. The case uses 6 mm tempered glass, so a tray reads clear. A brass foot rail sits at the base, so a guest rests a foot. A damp cloth keeps the slat clean.

Shop Set

A cafe counter of this build sets in about four hours. Three staff move the sections on a trolley, then bolt the plinth. The top lands on a bracket, so a joint reads tight. The case wires to one board, so a light starts at once. The rail bolts on the base, so a foot rail stays fixed. A counter splits in three, so a lift move is planned. Our countertop display crew checks the joint.

Specification Detail
Length 3200 mm
Height 1000 mm
Board 18 mm
Face Wood slat
Top Stone
Case glass 6 mm
Rail Brass

Site Use

A cafe uses this cafe counter for a service line. A bakery uses one for a front till run. A hotel uses one for a lobby coffee bar. A roastery uses one for a cupping room. Retail store fixtures of this build fill a run. A shop of 6.4 m takes two counters at this length. A mall kiosk set joins two units.

Build Notes

The board cuts on a panel saw, then slats on a CNC line. A cafe counter of this build keeps an even face after a season. The frame welds on a jig, so a corner stays square. Stone cuts on a water saw, so an edge reads clean. Each lot is checked for a level top and a soft case lid before packing. Read our bench notes for the joint test.

Sizes and Price

Length runs at 2400, 3200 or 4000 mm for this cafe counter. Height runs at 900 or 1050 mm. The slat comes walnut, oak or ash. A case set, a rail and a shelf set are options. List price starts at USD 2200 for the 3.2 m counter. ukiosks builds this cafe counter in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Plum Cafe Service Counter with Wood Slat Front and Glass Pastry Case, 3200 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop