UniqueKiosk · Shenzhen workshop

Flax White GRP Guard Booth with Glazed Door and Sliding Window, 1600 mm

$9,800.00

GRP booth in moulded fibreglass with a glazed door, a sliding window and a flat overhang roof. Price range: USD 9800-13200, set by size and window set.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Booth Form

This GRP booth runs 1600 mm wide and 2200 mm tall. A GRP booth of this size gives one guard a dry post at a gate. A glazed door sits at the left, so a shift change steps in clean. A sliding window opens at the right, so a ticket hand-off works at eye height. A flat roof overhangs the body, so rain runs off the back. One booth covers one lane. A office pod plan sets the gate.

Moulded Shell

The shell moulds from glass reinforced plastic in a single layup. A GRP booth in this build holds a rigid face with no screw line. The gel coat resists sun and salt, so a coast site reads white for years. Panels carry a moulded relief, so a wall reads solid. Glass runs 6 mm tempered, so a knock stays safe. A hose wash keeps the shell clean.

Gate Set

A GRP booth of this build sets in about two hours. A lifted unit lands on a prepared pad, so a plinth sits level. The shell weighs light, so a small crane lifts it. A door seal closes on a frame, so a draught stays out. Power runs to a wall box, so a light and a fan start at once. A booth can be moved later with a forklift. Our store fixture crew checks the pad.

Specification Detail
Width 1600 mm
Height 2200 mm
Shell GRP layup
Glass 6 mm
Roof Flat overhang
Door 1 glazed
Window Sliding

Site Use

A mall uses this GRP booth for a car park gate. A site office uses one for a depot entry. A park uses one for a ticket lane. A campus uses one for a vehicle check. Mall retail kiosks of this build fill a gate. A road of 300 m takes two booths at this size. A mall kiosk set joins the lane.

Build Notes

The shell lays up in a female mould, then cures in a heated bay. A GRP booth of this build keeps a straight face after a season. The frame sets on a jig, so a door hangs true. The gel coat sprays in a booth, so a finish reads even. Each lot is checked for a level roof and a free window before packing. Read our bench notes for the seal test.

Sizes and Price

Width runs at 1200, 1600 or 2000 mm for this GRP booth. Height runs at 2200 or 2400 mm. The shell comes white, gray or blue. A window set, a light set and a counter shelf are options. List price starts at USD 9800 for the 1.6 m booth. ukiosks builds this GRP booth in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Flax White GRP Guard Booth with Glazed Door and Sliding Window, 1600 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop