UniqueKiosk · Shenzhen workshop
Wynn Wood Grain Coffee Stand with Espresso Bar and Glass Case, 2600 mm
$10,500.00
Coffee stand in wood veneer with a black stone top, a two group machine, a glass pastry case and bench seating. Price range: USD 10500-14500, set by length and fit out.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Stand Form
This coffee stand runs 2600 mm long and 2100 mm tall. A coffee stand of this size fits a lobby bay or a mall corner of 8 sqm. A stone counter carries a two group machine, so two shots pull at once. Bench seating runs at the left, so a guest sits with a cup. A glass case holds pastry, so a second sale sits beside the till. One stand serves a queue of four. A mall kiosk plan sets the bay.
Veneer and Tile
The body builds from 18 mm board with a wood veneer face on a steel frame. A coffee stand in this build takes a daily wipe with no stain. The counter runs a black stone sheet, so a hot cup leaves no ring. A tile back wall faces the machine, so a splash reads clean. The case uses 6 mm tempered glass, so a lid lifts light. A damp cloth keeps the veneer clean.
Lobby Set
A coffee stand of this build sets in about five hours. Three staff move the sections on a trolley, then bolt the base. The machine fixes on a mat, so a shot reads steady. The case wires to one board, so a light starts at once. Bench bolts on the frame, so a seat stays fixed. A stand splits in three, so a lift move is planned. Our store fixture crew checks the joint.
| Specification | Detail |
|---|---|
| Length | 2600 mm |
| Height | 2100 mm |
| Board | 18 mm |
| Veneer | Walnut |
| Top | Black stone |
| Glass | 6 mm |
| Seats | 3 stools |
Site Use
A hotel uses this coffee stand for a lobby bar. A mall operator uses one for a corner bay. An office uses one for a staff lounge. An airport uses one for a gate point. Food kiosks of this build fill a bay. A hall of 12 m takes two stands at this length. A food kiosk set joins the corner.
Build Notes
The board cuts on a panel saw, then veneers on a press. A coffee stand of this build keeps a flat face after a season. The frame welds on a jig, so a corner stays square. Stone cuts on a water saw, so an edge reads clean. Each lot is checked for a level top and a soft case lid before packing. Read our bench notes for the case test.
Sizes and Price
Length runs at 2200, 2600 or 3200 mm for this coffee stand. Height runs at 2000 or 2200 mm. The veneer comes walnut, oak or ash. A machine set, a case set and a bench set are options. List price starts at USD 10500 for the 2.6 m stand. ukiosks builds this coffee stand in Shenzhen to order, so send your drawing through contact us.
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Polish Display Cabinet, Two Bays with LED Shelf Strips
Price:
Skincare Display Cabinet, Black Frame 2 m with Glass Cases
Price:
Marble-Base Double Rail Garment Rack, Gold 1.2 m
Price:








Reviews
There are no reviews yet.