UniqueKiosk · Shenzhen workshop
Grove Chrome Wire Grid Peg Hook, 200 mm
$14.00
Wire grid peg hook in chrome steel with a clip plate and a straight arm. Price range: USD 14-30, set by arm length and pack count.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Arm and Clip
This wire grid peg hook reaches 200 mm from a panel. A wire grid peg hook of this reach holds a carded pack or a key ring. The arm runs straight with a small tip bend, so a pack stays put. The clip plate grips a mesh bar, so no screw touches the wall. The plate carries a notch, so a hook stays level. One hook holds 6 kg. A retail display plan sets the hook pitch.
Chrome Build
The arm forms from 4 mm steel wire with a chrome plate. A wire grid peg hook in this gauge takes a heavy carded pack without a sag. The tip bends up 15 mm, so a hook keeps a pack on the arm. The clip plate presses from 1.5 mm sheet, so a hook fits a mesh bar. The chrome runs 0.5 micron, so a face resists a wipe. A dry cloth clears a print from a chrome plate.
Grid Set
A wire grid peg hook sets in about five seconds with no tool. A staff holds the plate square, then presses it onto a mesh bar. A hook moves along a bar, so a staff resets a line in a minute. Twelve hooks fill a 900 mm bar with a 75 mm pitch. A hook also fits a slatwall with an adapter clip. A panel of 1800 mm carries eighty hooks in rows. Our store fixture crew checks the mesh.
| Specification | Detail |
|---|---|
| Arm | 200 mm |
| Wire | 4 mm |
| Plate | 1.5 mm |
| Tip bend | 15 mm |
| Load | 6 kg |
| Pack | 25 |
| Finish | Chrome |
Store Use
A jewellery shop uses this wire grid peg hook for a charm line. A hardware shop uses one for a small part pack. A petrol station uses one for a key ring. A craft booth uses one for a card row. Wall fixtures of this build carry a full hook grid. A booth wall of 1800 mm takes eighty hooks at this pitch. A countertop display holds the small stock.
Build Notes
The wire cuts to length, then bends on a press with a stop. A wire grid peg hook of this build keeps a level arm after a load. The plate stamps in one hit, so the clip reads square. The chrome bath runs after a polish, so a face reads bright. Each lot is checked for a firm clip and a level arm before packing. Read our bench notes for the clip check.
Sizes and Price
The arm runs at 100, 150 or 200 mm for this wire grid peg hook. The pack runs at ten, twenty five or fifty. The finish comes chrome, black or white. A double hook and a straight faceout are options. List price starts at USD 14 for the 200 mm hook. ukiosks builds this wire grid peg hook in Shenzhen to order, so send your drawing through contact us.
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensing Optical Display Table, Black Top 1.8 m
Price:
Circular Display Table, White Tiers and Chrome Legs 1.2 m
Price:
Sleek Cosmetic Display Rack, Black Steel Shelves 1.2 m
Price:








Reviews
There are no reviews yet.