UniqueKiosk · Shenzhen workshop
Wisp Chrome Slatwall Display Hook, 200 mm
$14.00
Slatwall hook in chrome steel with a flat back plate and a curved arm. Price range: USD 14-32, set by arm length and pack count.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Plate and Arm
This slatwall hook stands 100 mm tall on a 40 mm wide plate. A slatwall hook of this reach holds a carded item or a cap. The arm curves to 200 mm, so a packed item hangs clear of the wall. The back plate carries a top tab, so a hook fits a 5 mm groove. The arm ends in a round tip, so a bag strap slides off. One hook holds 8 kg. A retail display plan sets the hook pitch.
Chrome Build
The plate and the arm form from 2 mm steel. A slatwall hook in this gauge takes a heavy carded pack without a bend. The arm bends on a mandrel, so a curve reads even. The plate folds at the tab, so a hook sits tight in a groove. The chrome plate runs at 0.5 micron, so a hook resists a wipe. A dry cloth clears a print from a chrome face.
Wall Setup
A slatwall hook sets in about ten seconds with no tool. A staff tilts the tab into a groove, then drops the hook level. The plate slides along a run, so a staff resets a line in a minute. A hook fits a slatwall panel or a grid panel on a link clip. Twelve hooks fill a 900 mm wall line. A hook moves from a wall to a grid in one step. Our wall fixture crew checks the groove.
| Specification | Detail |
|---|---|
| Arm | 200 mm |
| Plate | 100×40 mm |
| Steel | 2 mm |
| Tab | Slatwall 5 mm |
| Load | 8 kg |
| Pack | 10 |
| Finish | Chrome |
Store Use
A convenience shop uses this slatwall hook for a carded line. A cap shop uses one for a hat wall. A beauty shop uses one for a mask pack. A petrol station uses one for a key line. Wall fixtures of this build carry a full run. A wall of 900 mm takes twelve hooks at this pitch. A store fixture shelf holds the bulk.
Build Notes
The steel strip cuts on a press, then folds on a die. A slatwall hook of this build keeps a firm tab after a move. The arm bends on a mandrel, so a tip stays round. The plate polishes before the chrome bath, so a face reads smooth. Each lot is checked for a level hook and a firm tab before packing. Read our bench notes for the tab check.
Sizes and Price
The arm runs at 100, 150 or 200 mm for this slatwall hook. The pack runs at ten, twenty five or fifty. The finish comes chrome, white or black. A hook clip and a grid adapter are options. List price starts at USD 14 for the 200 mm hook. ukiosks builds this slatwall hook in Shenzhen to order, so send your drawing through contact us.
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensing Optical Display Table, Black Top 1.8 m
Price:
Circular Display Table, White Tiers and Chrome Legs 1.2 m
Price:
Sleek Cosmetic Display Rack, Black Steel Shelves 1.2 m
Price:








Reviews
There are no reviews yet.