UniqueKiosk · Shenzhen workshop

Stow White Steel Gondola Unit with Pegboard Back, 1200 mm

$620.00

Gondola unit in white powder coated steel with four shelves and a pegboard back. Price range: USD 620-980, set by height and shelf count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Shelf Frame

This gondola unit runs 1200 mm wide and 2000 mm tall. Four shelves sit on a slotted upright at 50 mm steps. A gondola unit of this height carries a full grocery range on one face. The base deck runs 500 mm deep at 150 mm off the floor. The header board closes the top edge at 100 mm. Feet adjust at 20 mm on a four point base.

Pegboard Back

The back panel is a perforated steel sheet at 1.0 mm. A gondola unit with a pegboard back takes a hook for a hanging pack. The holes run at 25 mm pitch, so a hook lands on a square. The panel sits in the rear frame with a rivet joint. A shop hangs a small item on the back and sets a shelf below it. The panel also blocks a wall behind the unit. A display rack uses the same hole pitch.

Steel and Coat

The frame is a 30 mm steel tube with a white powder coat. A gondola unit in this coat takes a mop and no rust spot. The shelves are 1.2 mm sheet with a folded front edge and a price strip channel. A shelf holds 60 kg across the span. The coat runs at 60 micron, so a chip does not show a grey patch. A shop wipes the unit with a damp cloth. Our gondola shelving shares this shelf.

Specification Detail
Width 1200 mm
Height 2000 mm
Depth 500 mm
Shelves Four, 1.2 mm steel
Back Pegboard, 25 mm pitch
Load 60 kg per shelf
Coat White powder, 60 micron

Store Use

A convenience store sets this gondola unit on a wall run. A pharmacy uses one for a health line. A home goods shop puts one at a category end. A pop up store rents a short run for a week. Store display shelves pair with this footprint. A wall with a low ceiling likes the 2000 mm height, since the header still clears a beam. A display stand fits the end cap.

Build Notes

The frame is welded on a jig, so every unit matches a run. A gondola unit of this build keeps a straight shelf line after a load. The upright slots are punched in one pass, so a shelf sits level. The pegboard is cut on a CNC bed, so the holes stay in line. Each unit is checked for a square frame and a level deck before packing. Read our bench notes for the punch detail.

Sizes and Price

Width runs at 900, 1200 or 1500 mm for this gondola unit. Height runs at 1600, 2000 or 2400 mm. Shelf count runs at four or five. The coat comes in white, light grey or black. A top light bar, a hook set and a base kick plate are options. List price starts at USD 620 for the 1200 mm unit. ukiosks builds this gondola unit in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Stow White Steel Gondola Unit with Pegboard Back, 1200 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop