UniqueKiosk · Shenzhen workshop

Beacon White Collapsible Z Rack with Chrome Rail

$310.00

Collapsible clothing rack with white Z side frames, a chrome rail and four casters. Price range: USD 310-560, set by rail length and finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Folding Frame

This collapsible clothing rack folds flat in under a minute. The two Z side frames hinge at the base, so the unit stacks against a wall when empty. A shop keeps four racks on a trolley and opens one when stock arrives. A collapsible clothing rack of this shape needs no tools for the fold. The base bar runs the full width and locks the frames upright. A spring clip at each joint holds the frame open under load. Z racks collapsible list this joint type.

Chrome Rail

A chrome rail runs across the top of this collapsible clothing rack at 1200 mm. The tube is 25 mm and takes standard hanger hooks without a spacer. A shop loads 40 kg of shirts and the rail stays straight. The chrome coat resists a hanger scratch, so the surface reads clean after a busy day. An end cap sits on each joint and keeps a hanger from sliding off. A collapsible clothing rack with this rail height suits a 1600 mm wall bay. Single rail racks share this tube size.

Casters

Four casters sit on the feet of this collapsible clothing rack. Two carry a brake and lock the rack for a fitting session. A shop rolls the unit from the stockroom to the floor with one hand. Each caster takes 80 kg, so the full rack moves with stock on it. The wheel face is a soft type and leaves no mark on tile. A collapsible clothing rack with brakes stays put on a slight floor slope. Rolling racks use this caster size.

Specification Detail
Rail Length 1200 mm
Height 1200 mm
Frame 25 mm steel tube, Z fold
Rail Chrome plated, 25 mm
Casters 4, two with brake
Finish White powder coat
Load 40 kg on the rail

Build Notes

The frame uses 25 mm steel tube with a white powder coat at 60 microns. The rail is a chrome plated tube with a polished face. The weld at each Z corner is ground before coating, so no seam shows. A collapsible clothing rack of this build carries 40 kg at the rail and 25 kg on the base bar. Each unit leaves the bench after a fold test and a brake test. Assembly takes one person and no tools beyond a spanner. Read our bench notes for the build detail.

Where It Works

Clothing shops use this collapsible clothing rack for sale stock and returns. A stockroom keeps six folded units behind the till and opens them for a delivery. A market stall folds the rack into a van at the end of the day. A studio uses one rail for a shoot and folds it after the set. Retail clothing racks pair with this rail height. A shop with tight storage likes the fold, since the rack takes little space when closed.

Sizes and Price

Rail length runs at 1200 mm, 1500 mm or 1800 mm. Height runs at 1200 mm or 1500 mm. Load runs at 40 kg or 60 kg for this collapsible clothing rack. The finish comes in white, black or chrome. A brake set, a dust cover and a second rail are options. A shop can also order a shelf bar under the rail. List price starts at USD 310 for the 1200 mm unit. ukiosks builds this collapsible clothing rack in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Beacon White Collapsible Z Rack with Chrome Rail”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop