UniqueKiosk · Shenzhen workshop

Galleried Museum Pedestal Vitrine with Dark Crown

$1,150.00

Glass column display case with a walnut crown, warm top light and a black plinth base. Price range: USD 1,150-1,760, set by height.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Glass Column Body

Four clear glass panes form the body of this display case. The column runs 400 mm square and 1500 mm tall, with 8 mm tempered panes on all sides. Thin polished joints hold each corner, so the glass reads as one tube. A shop sets a single object inside and the light enters from every angle. Display cases list this column size. A clear tube also hides nothing, so the item carries the view.

Walnut Crown

A dark walnut crown closes the top of this display case at 150 mm deep. The crown also carries a small light switch. The crown houses a warm LED panel and a small driver box. A shop sets the panel at 3000 K and the object glows from above. The crown also traps the glass top edge, so the panes cannot lift. Display shelves use this crown depth. A slim crown also keeps the tube rigid on a tall run.

Black Plinth Base

A black plinth lifts this display case 600 mm off the floor. The plinth runs 400 mm square with a 40 mm set back toe. A shop hides the floor socket and the spare cable inside the plinth. The top plate of the plinth also carries a soft pad, so a metal object cannot scratch. Retail displays fixtures share this plinth height. A low plinth also keeps the glass clear of a mop.

Where It Fits

This display case fits a museum lobby, a gallery alcove or a hotel vitrine line. The 400 mm footprint lets a run of four sit on a 2 m wall with even gaps. A shop sets the row 500 mm from a bench and keeps the aisle at 1000 mm. A dark crown also reads quiet under a pale plaster ceiling. This display case also holds one object in a narrow alcove. Display racks fit the same run.

Load and Care

The inner floor of this display case holds 20 kg on the plinth top plate. Keep a heavy bronze centred, since a corner load strains the glass joint. The tube stays square within 1 mm when the plinth sits level. Wipe the glass with a soft cloth and water only, and dust the crown panel each month. Check the joint bolts each quarter, since a loose bolt lets a pane settle. Read more about our bench on our museum builds.

Size Options

Height runs at 1500 mm or 1800 mm on request. The footprint runs at 400 mm or 500 mm square. A shop can order a lockable glass door, a mirrored plinth top, or an oak crown in place of walnut. The plinth also comes in satin white or graphite. List price starts at USD 1,150 for the 1500 mm unit. ukiosks builds this display case in Shenzhen to order, so send your drawing through contact us.

Specification Detail
Footprint 400 x 400 mm
Height 1500 mm
Glass 8 mm tempered, 4 sides
Crown Walnut, LED 3000 K
Base Black plinth, 600 mm
Load 20 kg inner floor
Joint Polished steel, 4 corner

Reviews

There are no reviews yet.

Be the first to review “Galleried Museum Pedestal Vitrine with Dark Crown”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop