UniqueKiosk · Shenzhen workshop

Patinated Gold Rack with Three Wood Shelf Bays

$1,080.00

Patinated gold rack with a top frame box, one hang bar, three wood shelves and a white deck on casters. Price range: USD 1,080-1,480, set by bay count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Top Frame Box

A top frame box closes the head of this gold rack. The box runs 130 mm deep and carries a light panel or a printed card. A shop sets the box above the hang, so the light falls down the shoulder line. The box also stiffens the tall frame at the top edge. This gold rack suits a vintage bay or a small boutique. Clothing racks list this frame depth.

gold shelf rack

Hang Bar Level

One hang bar crosses this gold rack at 1550 mm. The bar runs 25 mm round tube and sits on a slotted upright, so the height can move. A shop sets the bar high for a long coat and low for a jacket drop. The bar of this gold rack also stays clear of the shelf stack below by 250 mm. A long sleeve then drops past the top shelf without a fold. Display racks use this bar gauge.

gold rack front view

Three Wood Shelves

Three wood shelves stack at the base of this gold rack. Each shelf runs 350 mm pitch and 450 mm deep, with a light oak face. A shop sets a folded knit stack on each level and keeps the colour run in order. The wood tone also softens the gold frame and warms a pale floor. Display shelves share this shelf pitch.

gold rack side view

Shop Use

This gold rack fits a vintage corner, a knit floor or a bridal bay. The single bay holds 25 hang pieces and three shelf stacks in a 900 mm width. A shop sets the unit 400 mm from a wall and keeps 800 mm clear in front. The patina of this gold rack also reads warm under a 3000 K lamp. A narrow bay also fits a corridor corner with little floor. Retail displays fixtures fit the same floor.

Load And Care

This gold rack holds 45 kg on the hang bar and 20 kg per wood shelf. Keep the heavy stack on the low shelf, since the frame carries the load down the upright. A loaded shelf stays level within 2 mm across its width. Wipe the gold with a dry cloth and oil the wood face once a year. Check the upright bolts after a month, since a loose bolt lets the bay sway. Read more about our bench on our patina finishes.

wood shelf bracket detail

Size Options

Bay count runs at one or two on request. Height runs at 2200 mm or 2400 mm. A shop can order a fourth shelf, or a glass shelf in place of one wood one. The finish comes in patinated gold, aged brass or a soft bronze. List price starts at USD 1,080 for the single bay unit. ukiosks builds this gold rack in Shenzhen to order, so send your bay plan through contact us.

Specification Detail
Bays 1, 900 mm wide
Height 2200 mm
Depth 450 mm
Shelves 3 wood, 350 mm pitch
Hang bar 1550 mm, slotted
Load 45 kg bar, 20 kg shelf
Finish Patinated gold, oak shelves

Reviews

There are no reviews yet.

Be the first to review “Patinated Gold Rack with Three Wood Shelf Bays”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop