UniqueKiosk · Shenzhen workshop

Long Span Steel Double Rail Rack with Oak Deck

$1,180.00

Raw steel double rail rack in a wide two bay frame with an oak deck floor. Price range: USD 1,180-1,680, set by span.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Wide Two Bay

Two bays share one long frame on this double rail rack. The span runs 2400 mm with a centre post at the midpoint. A shop hangs a full suit line on one bay and a shirt line on the other. The wide span also fills a wall bay in one unit, so the floor needs no second frame. This double rail rack suits a menswear floor or a designer corner. Clothing racks list this span.

double rail rack

Top Shelf Bar

A top shelf bar runs the full length of this double rail rack at 2100 mm. The bar carries a light box row or a folded stack above the hang. A shop sets the bar 350 mm below the top frame, so a tall box still fits. The bar also ties the frame across the span and stops a rail sag. Display shelves share this bar depth.

double rail rack front

Twin Hanging Rails

Two rails cross this double rail rack at 1300 mm. Each rail runs 25 mm round tube and covers one bay of hang. A shop keeps the rails level so the hems sit on one line. The rails of this double rail rack also sit clear of the central post by 400 mm on each side. A long coat then swings past the post without a snag. Display racks use this rail gauge.

double rail rack side

Shop Use

This double rail rack fits a menswear floor, a denim wall or a showroom. The oak deck takes shoe pairs or a look book stack under the hang. A shop sets the unit 500 mm from a wall and keeps 900 mm clear in front. The raw steel face also suits a concrete wall or a grey one. Retail displays fixtures fit the same floor.

Load And Care

Each rail holds 55 kg on this double rail rack, and the deck holds 60 kg spread. Keep the heavy coat row near a post, since the rail sags at mid bay. A loaded rail stays level within 3 mm over 1200 mm. Wipe the steel with a dry cloth and seal the oak deck once a year. Check the frame bolts after a month, since a loose bolt lets the bays drift. Read more about our bench on our long span builds.

steel post joint detail

Size Options

Span runs at 2400 mm or 3000 mm on request. Height runs at 2100 mm or 2300 mm. A shop can order a third rail for a short line, or a low shelf in place of one rail. The deck comes in oak, walnut or a grey laminate. List price starts at USD 1,180 for the 2400 mm unit. ukiosks builds this double rail rack in Shenzhen to order, so send your wall span through contact us.

Specification Detail
Span 2400 mm, 2 bays
Height 2100 mm
Depth 500 mm
Rails 2, 25 mm round
Deck Oak, 500 mm deep
Load 55 kg rail, 60 kg deck
Finish Raw steel, oak deck

Reviews

There are no reviews yet.

Be the first to review “Long Span Steel Double Rail Rack with Oak Deck”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop