UniqueKiosk · Shenzhen workshop

Caster Base Steel Shirt Rack with Canopy Shelf

$560.00

Raw steel shirt rack on four casters with a canopy shelf, two rails and a mid deck. Price range: USD 560-820, set by width.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Canopy Top Shelf

A canopy shelf closes the top of this shirt rack. The shelf runs 900 mm wide and sits above a low sign panel. A shop sets folded stock on the shelf and keeps the sign face clean for a price card. The canopy also shades the hang below from a top spot. This shirt rack suits a denim wall or a tee floor. Clothing racks list this canopy width.

steel shirt rack

Two Hanging Rails

Twin rails run under the canopy of this shirt rack. Each rail carries a short sleeve row at 1400 mm and 1650 mm. A shop hangs tees on the low rail and shirts on the high one, so a shopper reads both lines. The rails also sit on a slotted upright, so the height can move. Display racks use this rail height.

shirt rack front view

Mid Deck And Base

A mid shelf and a low deck divide this shirt rack into three levels. The deck runs 500 mm deep and takes a stack of folded stock. A shop keeps the mid shelf for a size run and the deck for the bulk pack. The base frame also holds four casters, and two of them lock. Display shelves share this deck depth.

shirt rack side view

Shop Use

This shirt rack fits a tee shop, a denim floor or a promo bay. The casters let one staff member roll the unit to a window in a minute. A shop sets this shirt rack 400 mm from a wall. Keep 900 mm clear in front of the shirt rack. The raw steel face reads cool under a 4000 K lamp, and the canopy sign takes a chalk card. Retail displays fixtures fit the same floor.

Load And Care

Each rail holds 40 kg on this shirt rack, and the canopy shelf holds 25 kg spread. Keep the heavy stack on the deck, since the mid shelf spans 900 mm. A loaded rail stays level within 2 mm across its span. Wipe the steel with a dry cloth and oil the bare face twice a year. Check the caster locks after a month, since a worn lock lets the rack roll. Read more about our bench on our caster builds.

shirt rack rail detail

Size Options

Width runs at 900 mm or 1200 mm on request. Height runs at 1800 mm or 2000 mm with the canopy. A glass mid shelf can replace the steel one. A third rail can also join for a short line. The canopy sign panel can take a printed card or a chalk face. List price starts at USD 560 for the 900 mm unit. ukiosks builds this shirt rack in Shenzhen to order, so send your floor plan through contact us.

Specification Detail
Width 900 mm
Height 1800 mm
Depth 500 mm
Rails 2, slotted upright
Levels Canopy, mid shelf, deck
Load 40 kg rail, 25 kg shelf
Finish Raw brushed steel

Reviews

There are no reviews yet.

Be the first to review “Caster Base Steel Shirt Rack with Canopy Shelf”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop