UniqueKiosk · Shenzhen workshop

Pewter Steel Display Rack with Wood Grain Plates

$598.00

Grey steel display rack with five wood grain shelf plates and slim adjustable uprights. Price range: USD 598-880, set by width.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Wood Grain Plates

Five wood grain plates fill this display rack. The plate face carries a light oak print over a solid board, so it reads warm against the grey frame. A shop sets boxed goods on the upper rows and bulk stock at the base. The plate edge takes a small steel lip, which holds a row of jars in place. This display rack suits a grocery aisle with a low fit out budget. Display racks list this plate face.

pewter display rack

Grey Steel Uprights

Slim grey uprights carry this display rack at three points along the run. Each upright runs 30 mm wide, so the stock stays the main read. A shop sets the rack in two bays and adds a third later on the same base rail. The upright slot takes a plate pin at 50 mm steps. Retail displays fixtures share this upright size.

display rack plates front

Shop Use

The display rack suits a convenience store, a small grocery or a pharmacy bay. Five rows show a wide range in one line, and the base plate holds the bulk. A shop keeps 1000 mm clear in front, so a trolley turns without a scrape. The back plate closes the unit, so a bare wall behind stays out of sight. Display shelves fit the same aisle.

display rack plates side

Slot Adjustment

A slot rail runs up each upright of this display rack. The rail carries a 50 mm step, so a plate moves to fit a tall bottle or a flat box. A shop changes a row height in about one minute with no tool. The plate pin seats in the slot and holds a full row without a dip. Countertop displays use the same pin.

Load And Care

Each plate holds 70 kg on this display rack, and the base holds 100 kg. Keep the heavy drink packs on the low rows, since the top plate sits on a short upright span. A loaded unit stays level within 2 mm along the base rail. Check the plate pins after a month, since a loose pin lets a plate sag. Wipe the plate face with a damp cloth and keep the frame dry. Read more about our bench on our grey frames.

display rack slot detail

Size Options

Width runs from 900 mm to 1200 mm per bay on request, and bay count from one to three. Height runs at 1600 mm or 2000 mm. A shop can order a steel plate instead of the wood grain face on the low row. The frame comes in graphite, white or a warm grey. A low base plinth can swap for feet. List price starts at USD 598 for the two bay unit. ukiosks builds this display rack in Shenzhen to order, so send your bay plan through contact us.

Specification Detail
Width 1820 mm
Height 1800 mm
Depth 430 mm
Bays 2 upright frames
Plates 5 wood grain
Load 70 kg plate, 100 kg base
Finish Grey steel frame

Reviews

There are no reviews yet.

Be the first to review “Pewter Steel Display Rack with Wood Grain Plates”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop