UniqueKiosk · Shenzhen workshop
Shelf and Rail Steel Display Rack
$334.00
Black steel display rack mixing three shelf plates with a front hanging rail. Price range: USD 334-470, set by width.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Mixed Layout
This display rack mixes flat and hanging stock in one frame. A wide plate sits at 1400 mm and a second plate at 900 mm. A rail runs across the front under the top bar. A shop folds knitwear on the plates and hangs shirts from the rail. The two roles share one footprint of 900 mm. Display racks list this mixed layout.
Hanging Rail
A 25 mm round rail crosses the front of this display rack at 1200 mm. The rail sits on a short bracket, so a hanger clears the plate below. A shop hangs 18 shirts on the rail without crowding the folded row. The rail of this display rack also takes a hook for a bag chain or a sign card. Clothing racks list this rail gauge.
Plate Rows
Three plates carry the folded stock on this display rack. The plates run 400 mm deep and 20 mm thick, with a folded edge that holds a row straight. A shop sets denim on the low plate and light knitwear above. The open back keeps the plates visible from both sides of a low aisle. Display shelves share this plate edge.
Shop Use
The display rack suits a denim shop, a uniform counter or a hotel boutique. One unit shows a folded line and a hanging line together. A shop puts the rack near a fitting room, so a shopper picks both styles in one stop. The narrow base of this display rack also fits a corridor bay beside a lift lobby. Retail displays fixtures fit the same bay.
Load And Care
Each plate holds 40 kg and the rail 45 kg on this display rack. Keep the heavy denim on the low plate, since the upper plate sits on a short weld. A loaded rack stays level within 2 mm across the four feet. Check the rail bracket after a month, since a loose bracket lets the rail bow. Wipe the plates and keep the rail free of dust. Read more about our bench on our mixed frames.
Size Options
Width runs from 800 mm to 1200 mm on request. Height runs at 1600 mm or 1800 mm. A shop can order two rails for a full hanging wall. The plates can swap for an oak board on the low row. The finish also comes in chalk white or satin brass. List price starts at USD 334 for the 900 mm unit. ukiosks builds this display rack in Shenzhen to order, so send your mix plan through contact us.
| Specification | Detail |
|---|---|
| Width | 900 mm |
| Height | 1700 mm |
| Depth | 400 mm |
| Plates | 3 steel, 20 mm |
| Rail | 1 round, 25 mm |
| Load | 40 kg plate, 45 kg rail |
| Finish | Matte black powder coat |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Circular Display Table, White Tiers and Chrome Legs 1.2 m
Price:
Sleek Cosmetic Display Rack, Black Steel Shelves 1.2 m
Price:
Eyewear Display Stand, Hook Panel and Wood Drawers 1.6 m
Price:








Reviews
There are no reviews yet.