UniqueKiosk · Shenzhen workshop

Tower Wire Shelf Clothing Rack with Three Tiers

$328.00

Tall clothing rack with a top rail and three wire mesh shelf tiers for folded stock. Price range: USD 328-450, set by width.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Wire Tiers

Three wire mesh tiers carry the folded stock on this clothing rack. The mesh keeps a stack of denim flat and lets air move under the fabric. A shop sets sneakers on the low tier and folded knits above. The mesh also shows the stock from a side view. Each tier clips onto the upright at 300 mm steps. Display racks list these wire tiers.

tower wire clothing rack

Top Rail

A top rail crosses this clothing rack above the highest tier. The rail sits 300 mm above the mesh, so a hanger clears a folded pile. A shop hangs eight short pieces on the rail and keeps the tiers for stock. The top rail on this clothing rack also takes a clip sign for a markdown note. Retail displays fixtures share this rail mount.

clothing rack wire tiers

Corner Scroll

A small scroll bracket sits at each corner of this clothing rack. The bracket ties the mesh to the upright and spreads a point load along the frame. A shop sees the curve as a soft detail against the straight lines. The bracket also holds the mesh edge down, so a box does not catch. Clothing racks list this bracket.

clothing rack tiers side

Shop Use

The clothing rack suits a stockroom, a denim shop or a sample room. The tall frame shows four stock levels in one view. A shop uses the unit beside a fitting room and keeps the rail for try-on pieces. The open mesh also lets a shopper see a wall poster behind the frame. Countertop displays fit the same room.

Load And Care

Each wire tier holds 40 kg and the top rail 45 kg on this clothing rack. Keep heavy stock on the low tier, since the upper tiers sit on clipped sleeves. A loaded frame stays level within 2 mm across the four legs. Check the sleeve clips after a month, since a loose clip lets a tier slip down. Clean the mesh with a brush and keep it dry. Read more about our bench on our wire work.

clothing rack mesh corner

Size Options

Width runs from 800 mm to 1200 mm on request. Height runs at 1800 mm or 1950 mm. A shop can add a fourth tier for a taller stock line. The mesh can also swap for a steel plate. The finish also comes in chalk white or oxide grey. List price starts at USD 328 for the 900 mm frame. ukiosks builds this clothing rack in Shenzhen to order, so send your sizes through contact us.

Specification Detail
Width 900 mm
Height 1900 mm
Frame 19 mm round steel
Tiers 3 wire mesh
Tier step 300 mm
Load 40 kg tier, 45 kg rail
Finish Matte black powder coat

Reviews

There are no reviews yet.

Be the first to review “Tower Wire Shelf Clothing Rack with Three Tiers”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop