UniqueKiosk · Shenzhen workshop
Loop Leg Clothing Rack with Low Slat Shelf
$238.00
Light A side clothing rack with a top rail and a low slatted shelf for shoes. Price range: USD 238-340, set by width.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Light Frame
This clothing rack weighs 11 kg and carries its own weight in tube. Two A side frames hold a top rail, and a low shelf closes the floor line. A shop moves the unit with one person during a reset. The light frame also suits a pop up site where a cart is the only transport. The rail sits at 1650 mm, so a coat clears the shelf. Display racks list this light frame.
Low Slat Shelf
One slatted shelf sits 250 mm off the floor on this clothing rack. The shelf runs four tube bars, so a shoe pair rests flat and a wet sole drains. A shop sets boots on the shelf and keeps the rail for jackets. The shelf also stiffens the frame at the floor line. Staff lift the shelf for a sweep without moving the unit. Retail displays fixtures share this slat shelf.
Apex Joint
The top rail of this clothing rack meets the A frame at a welded apex. A small ball caps each end, so the rail cannot slip off the joint. A shop hangs a full run of twenty pieces on the rail. The apex weld also keeps the frame of this clothing rack square under a full hanging load. Clothing racks list this apex joint.
Shop Use
The clothing rack suits a market stall, a sample room or a small shop floor. The low shelf keeps the stock off a wet floor. A shop sets two units end to end for a longer run. The open sides of this clothing rack also let a shopper walk around the unit in a narrow bay. Countertop displays fit the same floor.
Load And Care
The top rail holds 65 kg and the low shelf 20 kg on this clothing rack. Keep heavy coats near the apex, since the rail bends at the middle. A loaded frame stays level within 2 mm across the four feet. Check the apex weld after a month, since a short weld lets the rail rock. Wipe the tubes and clear the slats of grit. Read more about our bench on our light frames.
Size Options
Width runs from 900 mm to 1400 mm on request. Height runs at 1600 mm or 1750 mm. A shop can add a second low shelf at 500 mm. The shelf can also swap for a plate deck. The finish also comes in chalk white or oxide grey. List price starts at USD 238 for the 1000 mm frame. ukiosks builds this clothing rack in Shenzhen to order, so send your sizes through contact us.
| Specification | Detail |
|---|---|
| Width | 1000 mm |
| Height | 1650 mm |
| Tube | 22 mm round steel |
| Low shelf | Slatted, 250 mm |
| Frame | 2 A side |
| Load | 65 kg rail, 20 kg shelf |
| Finish | Matte black powder coat |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Gold Frame Boutique Shelving Wall, Three Doors 2 m
Price:
Black Glass Display Tower, Three Bays 2.1 m
Price:
Bronze Single Rail Garment Rack, Three Shelves 2 m
Price:








Reviews
There are no reviews yet.