UniqueKiosk · Shenzhen workshop
Deck Base Rectangular Frame Clothing Rack
$275.00
Rectangular frame clothing rack with an inset rail and a flat steel base plate. Price range: USD 275-430, set by width.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Frame Outline
This clothing rack reads as a flat rectangle on the floor. Two uprights run 30 mm square and close with a top bar. The frame carries no cross brace, so the outline stays clean from any angle. A shop pairs it with a mirror and a plant for a small display. The rectangle also frames the stock like a picture, which suits a gallery style bay. Display racks list this frame.
Inset Rail
The hanging rail of this clothing rack sits 70 mm inside the top bar. A short bracket holds the rail at each end, so the rail stays under the frame edge. A hanger clears the bar when a shopper lifts a coat. The gap also gives the top edge a slim shadow line. A shop hangs shirts at 1700 mm and keeps the hem 400 mm above the plate. Retail displays fixtures share this inset rail.
Plate Foot
A steel plate carries this clothing rack at the floor. The plate runs 350 mm deep and the full width, so the unit stands without a wall fixing. Two welded foot plates tie the uprights to the deck. A shop sets shoes on the plate and keeps the rail for garments. Staff slide the unit on the plate instead of lifting it. The plate also spreads the load on a timber floor. Clothing racks list this plate foot.
Shop Fitting
The clothing rack suits a compact boutique, a hotel suite or a showroom corner. Its plain outline fits beside neon lighting, mirrors and low benches. A shop sets one unit of this clothing rack per fit block and moves it when the range changes. The open middle keeps the wall art or panel visible behind the stock. Countertop displays fit the same corner.
Load And Care
The rail holds 70 kg when weight spreads along the span. Keep heavy outerwear near an upright, since the rail dips at mid span. A loaded clothing rack stays level within 2 mm across the plate. Check the foot welds after a month, since a short weld lets the upright lean. Wipe the plate and avoid dragging a crate across the deck. Read more about our bench on our plate welding.
Width Options
Width runs from 900 mm to 1300 mm on request. Height runs at 1700 mm or 1850 mm. The plate can carry a low lip to stop a shoebox sliding. The frame also comes with a second rail set lower for trousers. The finish also comes in chalk white or oxide grey. List price starts at USD 275 for the 1000 mm unit. ukiosks builds this clothing rack in Shenzhen to order, so send your sizes through contact us.
| Specification | Detail |
|---|---|
| Width | 1000 mm |
| Height | 1750 mm |
| Frame | 30 mm square steel |
| Rail inset | 70 mm below top bar |
| Base plate | 350 mm deep |
| Load | 70 kg |
| Finish | Matte black powder coat |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Gold Frame Boutique Shelving Wall, Three Doors 2 m
Price:
Black Glass Display Tower, Three Bays 2.1 m
Price:
Bronze Single Rail Garment Rack, Three Shelves 2 m
Price:








Reviews
There are no reviews yet.