UniqueKiosk · Shenzhen workshop
Sawhorse A-Frame Clothing Rail with Foot Bar
$225.00
Sawhorse style clothing rail with capped posts, a clamped top rail and a foot bar. Price range: USD 225-340, set by span.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Capped Posts
This clothing rack lifts its posts 40 mm above the top rail and caps each end. The cap closes the tube, so dust and rain cannot enter. A shop sets a small sign or a look card on the flat cap. The clamp bolt under the cap lets staff change the rail height in one minute. A tall post also reads like a sawhorse, which suits a workshop floor. Display racks list this capped post.
Clamped Rail
A single bolt clamp holds the top rail on this clothing rack. The rail sits in a saddle and the bolt locks it. The span can move up or down 200 mm. No welding means a shop adjusts the rail height on site. The saddle also keeps the rail square to the posts. A long span stays straight under a full line of coats. Retail displays fixtures share this clamp.
Foot Bar
A foot bar ties the two A frames close to the floor on this clothing rack. The bar holds the stance at 500 mm depth and stops the legs from walking. A shop uses the gap under the rail for a low stock box. Staff lift one end and roll the unit on two feet for a reset. The bar also takes a chalk card for a price note. Clothing racks list this foot bar.
Shop Fitting
The clothing rack suits a menswear bay, a workwear shop or a studio line up. Its narrow stance fits a 600 mm aisle, so two units sit in a row. A shop hangs jackets at 1500 mm on this clothing rack and keeps the lower rail free for trousers. Shoppers see the stock line from the doorway without a panel in the way. Countertop displays fit the same aisle.
Load And Care
The rail holds 90 kg when weight spreads along the span. Keep heavy coats near a clamp, since the rail bends at mid span. A loaded clothing rack stays level within 2 mm across the four feet. Check the clamp bolt after a month, since a loose bolt lets the rail slide down. Wipe the cap and the post with a dry cloth each week. Read more about our bench on our clamp fitting.
Span Options
Span runs from 1000 mm to 1500 mm on request. Height runs at 1500 mm or 1650 mm. The rail can move down 200 mm on the same clamp. The frame also comes with a second clamp for a two tier line. The finish also comes in oxide grey or warm white. List price starts at USD 225 for the 1200 mm frame. ukiosks builds this clothing rack in Shenzhen to your spec, so send your sizes through contact us.
| Specification | Detail |
|---|---|
| Span | 1200 mm |
| Height | 1600 mm |
| Tube | 30 mm square steel |
| Rail clamp | 1 bolt, 200 mm travel |
| Foot bar | At 80 mm height |
| Load | 90 kg |
| Finish | Matte black powder coat |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Gold Frame Boutique Shelving Wall, Three Doors 2 m
Price:
Black Glass Display Tower, Three Bays 2.1 m
Price:
Bronze Single Rail Garment Rack, Three Shelves 2 m
Price:








Reviews
There are no reviews yet.