UniqueKiosk · Shenzhen workshop

Bolt Steel Wall Anchored Clothing Rail

$356.00

Black iron pipe clothing rail anchored to the wall by flange arms, with two floor legs. Price range: USD 356-520, set by width.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Wall Anchors

Two short pipe arms tie this clothing rail to the wall. Each arm bolts through a four bolt flange and closes with a cast tee on the top pipe. The wall carries the pull, so the frame cannot tip when a shopper lifts a coat. A shop fits the rail on a plain plaster wall with four anchors per arm. The pipe measures 32 mm and holds a full span without a middle support. Display racks list this anchored build.

wall anchored pipe rail

Floor Legs

Two vertical pipes drop from the top rail to floor flanges on this clothing rack. The legs take the vertical load, while the wall arms take the pull. A shop gets a fixed bay with no counterweight and no base plate underfoot. The legs stand clear of the floor, so a mat and a sweep fit under the rail. A stock room uses the same frame against a back wall. Retail displays fixtures share this leg set.

pipe clothing rail front

Visible Fittings

Cast tees, elbows and flanges stay visible on this clothing rack. Each fitting carries a threaded collar, so the frame assembles on site with a pipe wrench. A shop adjusts the height by turning the top tee before the final tighten. The joints read as part of the design, not as a defect. A loft uses the rail as a bare industrial line. The matte coat covers the cast skin. Clothing racks list these fittings.

pipe clothing rail wall arms

Store Use

The clothing rack suits a boutique back wall, a showroom bay or a studio sample line. The frame leaves the floor open, so a shop gains 400 mm of walking space near the rail. Two units on one wall create a full stock run. A shopper sees this clothing rack line at eye level from the doorway. The top pipe also takes a clip spotlight or a small sign. Countertop displays fit the same wall.

Load And Care

The rail holds 100 kg when weight spreads across the span between the legs. Keep heavy coats near a leg, since the pipe bends at mid span. A loaded clothing rack stays level within 2 mm along the two flanges. Check the wall anchors after the first month, since a soft wall lets a bolt work loose. Wipe the pipe and touch up any chip with black enamel. Read more about our bench on our flange set.

pipe rail flange detail

Span Options

Span runs from 1000 mm to 1600 mm between the wall arms on request. Rail height runs at 1600 mm or 1750 mm. A third leg can sit at the middle for a wide span. The frame also comes with a lower pipe shelf at 900 mm. The finish of this clothing rack also comes in raw iron or warm bronze. List price starts at USD 356 for the 1200 mm span. ukiosks builds this clothing rack in Shenzhen to your wall, so send your sizes through contact us.

Specification Detail
Span 1200 mm
Rail height 1700 mm
Pipe 32 mm black iron
Wall anchors 2 arms, 4 bolt flanges
Floor legs 2, flange base
Load 100 kg
Finish Matte black over cast

Reviews

There are no reviews yet.

Be the first to review “Bolt Steel Wall Anchored Clothing Rail”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop