UniqueKiosk · Shenzhen workshop

Industrial Platform Base Clothing Rack

$295.00

Black steel clothing rack with a dual top rail and a heavy rectangular platform base. Price range: USD 295-460, set by width.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Platform Base

A solid rectangular plate holds this clothing rack on the floor. The plate measures 1200 by 400 mm and 40 mm thick, with a welded foot plate for each upright. Weight sits low, so the frame stands firm without a wall or a castor brake. A shop sets the plate on a flat floor and leaves it there for a season. The plate also takes a pair of shoes at the front edge. Display racks list this plinth base.

platform base clothing rack

Dual Top Rail

Two rails run across the top of this clothing rack. The main rail sits at 1700 mm and a thin second rail sits 60 mm below it. Hangers go on the main rail, while the lower bar takes a sign or a light bar. A shop hangs eighteen pieces on the wide span. The paired line reads as one band from the aisle. A stock room uses the lower rail for a clip list. Retail displays fixtures share this rail pair.

clothing rack rails front

Uprights And Feet

Two 40 mm square uprights carry the rails on this clothing rack. Each upright lands on a welded foot plate bolted through the platform. The plate spreads the load across 150 mm of base. A shop needs no wall fixing and no counterweight. Two staff move the unit by lifting the plate end and dragging it. The frame stays square within 2 mm across the top. Clothing racks use the same foot plate.

clothing rack base side

Shop Placement

The clothing rack suits a boutique window, a showroom corner or a hotel retail bay. The heavy plate reads as a deliberate plinth, so the unit looks built in rather than loose. A shop sets one unit per colour story and changes the rail stock each week. Shoppers walk around the plate without kicking a leg. The frame also takes a spotlight clamped to the lower rail. Countertop displays fit the same bay.

Load And Care

The rails take 130 kg when weight spreads along the wide span. Keep heavy coats near an upright, since the top rail bends between the posts. A loaded clothing rack stays level within 2 mm along the plate. Check the foot plate bolts after a month, since a loose bolt lets the frame lean. Wipe the plate with a damp cloth and dry it at once. Read more about our bench on our plate work.

clothing rack base detail

Size Options

Platform width runs from 900 mm to 1500 mm on request. Height runs at 1600 mm or 1700 mm. The plate also comes with small adjustable feet for an uneven floor. A single rail version drops the second rail for a cleaner line. The finish of this clothing rack also comes in raw oxide or warm white. List price starts at USD 295 for the 1200 mm unit. ukiosks builds this clothing rack in Shenzhen to your size, so send your plan through contact us.

Specification Detail
Width 1200 mm
Height 1700 mm
Rails 2, at 1700 mm and 1640 mm
Uprights 40 mm square steel
Base plate 1200 x 400 x 40 mm
Load 130 kg
Finish Matte black coat

Reviews

There are no reviews yet.

Be the first to review “Industrial Platform Base Clothing Rack”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop