UniqueKiosk · Shenzhen workshop

Charcoal A-Frame Clothing Rack with Cross Bar

$215.00

Charcoal A-frame clothing rack with a wide top rail, low cross bar and flat glides. Price range: USD 215-340, set by width.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Two A Trusses

Two triangular trusses carry this clothing rack. Each truss has two splayed legs bolted to a top plate. The splay spreads 460 mm at the floor, which keeps the frame firm without a wall. The tube measures 25 mm square and stays straight under load. A shop hangs twenty pieces across the rail. The charcoal matte coat reads flat beside pale walls. Display racks list this truss frame.

a-frame clothing rack

Low Cross Bar

A cross bar ties the two trusses near the floor on this clothing rack. The bar sits 150 mm up and runs the full width. It stops the legs from walking apart when a full rail swings. A shop rests a folded box on the bar for intake stock. The bar also stiffens the frame for transport in one piece. Two staff carry the unit through a 900 mm door. Retail displays fixtures use the same tie bar.

clothing rack front bar

Flat Glides

Four flat glides sit under the legs of this clothing rack. Each glide is 30 mm wide and spreads the load on a timber floor. The frame stands still when a shopper pulls a hanger. A shop moves the unit by lifting one end and sliding it 200 mm. No castor means no brake to check each morning. A studio uses glides to protect a polished concrete slab. Clothing racks share this glide.

clothing rack truss side

Where It Works

The clothing rack suits a boutique run, a pop up stall or a market bay. The A shape reads open from both sides, so a shop uses it as a low divider. Stock hangs at one height across the rail. A stylist sets two units back to back for a double line. The frame also takes a timber shelf laid on the cross bar, so one clothing rack holds two layers. Countertop displays fit the same bay.

Load And Care

The rail takes 90 kg when weight spreads along the span and the trusses hold their shape. Keep heavy coats near a truss, since every rail bends at mid span. A loaded clothing rack stays level within 2 mm along the base. Check the top plate bolts after a month of use. Read more about our bench on our truss assembly.

rack top plate joint

Width Options

Rail width runs from 1000 mm to 1600 mm on request. Height runs at 1500 mm or 1650 mm. A wider frame takes a third truss at the middle. The legs also come with small adjustable glides for an uneven floor. The finish also comes in raw oxide or warm grey. List price starts at USD 215 for the 1200 mm frame. ukiosks builds this clothing rack in Shenzhen to your sizes, so send your plan through contact us.

Specification Detail
Rail width 1200 mm
Height 1500 mm
Trusses 2, bolted top plates
Tube 25 mm square steel
Cross bar At 150 mm height
Load 90 kg
Finish Matte charcoal coat

Reviews

There are no reviews yet.

Be the first to review “Charcoal A-Frame Clothing Rack with Cross Bar”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop