UniqueKiosk · Shenzhen workshop

Steel Curved Frame Rolling Clothing Rail

$238.00

Dark steel clothing rail with rounded shoulder bends and a U base on four castors. Price range: USD 238-360, set by width.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Bent Shoulders

Two rounded bends form the top corners of this clothing rail. Each upright turns into the hanging rail through a 60 mm radius bend. A bent corner removes the joint where a hanger can catch. The tube measures 32 mm and stays straight along the whole span. A shop hangs twenty pieces with room between them. The dark graphite coat on this clothing rack hides finger marks on a busy floor. Display racks list this bent type.

curved frame clothing rail

U Base Frame

A low U frame ties the two uprights at floor level on this clothing rack. The base runs 500 mm front to back and sits 100 mm off the floor. Two castors sit under each foot, so the unit rolls and turns. The U shape keeps the floor clear under the middle of the rail. A shop parks a full unit against a wall without a kick plate. Retail displays fixtures use the same base.

clothing rail front view

One Hand Move

The clothing rack weighs about 11 kg, so one staff member moves it. Two castors swivel and two run fixed, which keeps the unit straight on a long pull. A shop rolls a full rail into a window each morning and back at night. The castors clear a 12 mm threshold and a thin mat. Locks on the front pair hold the unit during a fitting. A back room uses this clothing rack for intake stock before tagging. Clothing racks share this castor set.

clothing rail side view

Raw Steel Look

The graphite finish reads as plain steel, not a painted gloss. A boutique pairs it with pale plaster, concrete or timber boards. The tube keeps a slim 32 mm section, so the rail looks light beside heavy cabinets. A shop uses two units of this clothing rack for a double run of one size range. The frame also carries a small sign board clipped to the rail end. Countertop displays fit the same run.

Load And Care

The rail holds 100 kg when weight spreads along the span. Keep heavy coats near an upright, since the rail sags at mid span. A loaded clothing rack stays level within 2 mm along the base. Hangers do not swing when the unit rolls. Wipe the coat with a dry cloth and avoid abrasive pads on the bends. Read more about our bench on our tube bending.

rail shoulder bend detail

Width Options

Rail width runs from 900 mm to 1500 mm on request. Height runs at 1400 mm or 1550 mm. A second rail can sit 300 mm below the first for short goods. Castors can be swapped for glides on a sloped floor. The finish also comes in satin chrome or warm grey. List price starts at USD 238 for the 1200 mm rail. ukiosks builds this clothing rack in Shenzhen to your length, so send your plan through contact us.

Specification Detail
Rail width 1200 mm
Height 1550 mm
Tube 32 mm round steel
Base U frame, 500 mm depth
Castors 4, two swivel
Load 100 kg
Finish Graphite steel coat

Reviews

There are no reviews yet.

Be the first to review “Steel Curved Frame Rolling Clothing Rail”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop