UniqueKiosk · Shenzhen workshop

Deep Step Acrylic Riser with Walnut Shelves

$128.00

Deep five step acrylic riser in walnut, 400 x 300 mm footprint and 250 mm height. Price range: USD 128-180, set by depth and step count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Deep Steps

Five deep walnut steps rise to 250 mm on this acrylic riser. The unit runs 400 mm wide and 300 mm deep, so each board holds a full row of boxed goods. A 55 mm rise keeps the label on a back board above the front board. One clear back panel and two clear ends frame the whole run. This acrylic riser suits a showcase floor or a boutique wall. Retail displays fixtures use the same deep pitch.

deep step acrylic riser

Walnut Boards

Each board is an 18 mm walnut plank with a sealed face and a straight edge. Clear acrylic panels carry the steps, and each board end takes two screws for a firm hold. The panels run 6 mm thick, which suits the longer span. A finished acrylic riser weighs about 3.2 kg. The dark face lifts gold, glass and pale packaging. Acrylic displays share this plank build.

acrylic riser five steps front

Showcase And Boutique

The riser works in a glass showcase, a boutique wall, a watch room or a gallery stand. Five deep steps take five price bands without a second fixture. A jeweler sets boxes on the lower steps and trays on the top step. A gallery uses the unit for small objects at three depths. The clear back panel keeps the wall color in view. Countertop displays fit the same case depth.

acrylic riser deep side

Load And Level

Each board carries about 7 kg when weight spreads across the plank. Keep a heavy tray near a side panel, because a deep span flexes at the middle. A loaded acrylic riser stays level within 2 mm over the width. Check the screws after a move, since a loose end lets the steps rock. Set the unit on a flat case floor to keep the steps true. A deep acrylic riser then holds its shape under load. Display racks hold stock behind it.

Clean And Fit

Wipe the walnut boards with a dry cloth and clean the acrylic panels with mild soap and a microfiber cloth. A dry acrylic riser keeps a clear face between resets. Keep water off the walnut edge, since a wet edge can lift the seal. The unit ships flat and takes about fifteen minutes to assemble. Read more about our bench and the finish we use.

acrylic riser walnut screws

Depth And Finish

Depth runs from 200 mm to 400 mm on request. Step count runs from three to six for a taller run. Walnut is the standard face, with oak or matte black as an option. The acrylic riser also takes a smoke back panel to cut glare in a lit case. List price starts at USD 128 for the five step unit. ukiosks builds this acrylic riser in Shenzhen to your case depth, so send your plan through contact us.

Specification Detail
Shelves 5 walnut boards
Footprint 400 x 300 mm
Height 250 mm
Material 6 mm acrylic, 18 mm walnut
Step rise 55 mm
Weight 3.2 kg

Reviews

There are no reviews yet.

Be the first to review “Deep Step Acrylic Riser with Walnut Shelves”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop