UniqueKiosk · Shenzhen workshop

Side Panel Acrylic Riser with Three Shelves

$88.00

Three shelf acrylic riser with tall clear side panels and pine boards, 300 x 160 mm. Price range: USD 88-130, set by height and shelf count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Three Shelf Span

Three pine shelves span between two tall acrylic panels on this acrylic riser. The unit runs 300 mm wide and 160 mm deep, and the top shelf sits at 115 mm. Each shelf rises 55 mm above the one in front, so bottle labels stay visible. The panels run higher than the top shelf and frame the stock. A shopper reads three rows in one look. This acrylic riser suits a cosmetics wall or a stockroom shelf. Acrylic displays use the same frame height.

side panel acrylic riser

Tall Panel Frame

Two clear panels carry the shelves and rise past the top board. Each panel runs 5 mm thick, and each board fixes with two screws per side. The pine boards run 15 mm thick with a sanded face and a clear coat. A finished acrylic riser weighs about 1.8 kg. The tall frame keeps bottles from tipping at the back. Retail displays fixtures follow this frame build.

acrylic riser three shelves front

Cosmetics And Stock

The riser works on a cosmetics wall, a nail bar, a pharmacy shelf or a stockroom bench. Three levels hold three product families apart. A beauty advisor sets testers on the top shelf and sealed stock below. A stockroom counts sizes by row. The tall panels hide a messy back wall behind the unit. A framed acrylic riser like this keeps a test shelf tidy. Countertop displays fit the same 160 mm depth.

acrylic riser tall side panel

Load And Level

Each board carries about 6 kg when weight spreads across the span. Keep the tallest bottles on the top board near a panel, because the middle flexes first. A full acrylic riser stays level within 2 mm over the width. Check each screw after assembly, then again after a store move. Place the unit on a flat surface so the panels stay vertical. Display racks hold reserve stock behind it.

Clean And Fit

Wipe the pine boards dry and clean the acrylic panels with mild soap and a microfiber cloth. A dry acrylic riser keeps its clear look between resets. Keep solvent cleaners off the panel edge, because they craze the surface. The unit ships flat and takes about ten minutes to assemble. Read more about our bench and the finish we use.

acrylic riser shelf screws

Height And Finish

Shelf count runs from two to four on request. Height runs from 90 mm to 200 mm for a taller wall unit. Pine is the standard board, with oak or walnut veneer as an option. The acrylic riser also takes a tinted panel to cut glare under a spotlight. List price starts at USD 88 for the three shelf unit. ukiosks builds this acrylic riser in Shenzhen to your shelf height, so send your plan through contact us.

Specification Detail
Shelves 3 pine boards
Footprint 300 x 160 mm
Height 115 mm
Material 5 mm acrylic, 15 mm pine
Step rise 55 mm
Weight 1.8 kg

Reviews

There are no reviews yet.

Be the first to review “Side Panel Acrylic Riser with Three Shelves”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop