UniqueKiosk · Shenzhen workshop
Dark Walnut Acrylic Riser with Four Steps
$108.00
Four step acrylic riser in dark walnut veneer on clear acrylic supports, 310 x 215 mm. Price range: USD 108-150, set by finish and step count.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Four Walnut Steps
Four shelves in dark walnut rise in even steps on this acrylic riser. The unit runs 310 mm wide and 215 mm deep, and the top shelf reaches 170 mm. Each step adds 45 mm, so a back row of bottles clears the front row. The dark face gives a warm contrast on a pale counter. Both sides stay clear, so the shelves look like they float. This acrylic riser suits a jewelry case or a hotel desk. Acrylic displays use the same step pitch.
Veneer And Supports
Each shelf is a 15 mm board with a walnut veneer face and a sealed edge. Two clear acrylic supports carry the boards, and a screw holds each shelf end. The support runs 5 mm thick and stays stiff under load. A finished acrylic riser weighs about 2 kg. The veneer resists a light wipe and keeps its tone. A dark acrylic riser like this reads as a premium fixture. Retail displays fixtures share this veneer build.
Watch And Jewelry Use
The riser works inside a jewelry case, a watch bar, a perfume wall or a boutique back counter. Four steps separate four price bands with no clutter. A salesperson sets rings on the lowest board and necklaces above. The walnut tone suits gold and warm metal stock. A glass case on a dark floor uses the acrylic riser for height. Countertop displays fit the same case depth.
Load And Level
Each board carries about 4 kg when weight sits near the supports. Keep a heavy tray in the middle, because a shelf end is the weak point. A full acrylic riser stays level within 2 mm over the width. Adjust the screws once after assembly and check them after a move. Place the unit on a flat surface, since a slope pulls the steps off line. Display racks hold reserve stock nearby.
Care And Assembly
Wipe the veneer with a dry cloth and clean the acrylic supports with mild soap and a microfiber cloth. Keep water off the veneer edge, because a wet edge can lift the film. The unit ships flat with screws and a driver. Assembly takes about ten minutes for one person. Read more about our bench and the finish we use.
Size And Finish
Width runs from 250 mm to 450 mm on request. Step count runs from three to six. Walnut veneer is the standard face, with oak or matte black as an option. The acrylic riser also takes a smoke tint for a darker case. List price starts at USD 108 for the four step unit. ukiosks builds this acrylic riser in Shenzhen to your case size, so send your plan through contact us.
| Specification | Detail |
|---|---|
| Shelves | 4 walnut veneer boards |
| Footprint | 310 x 215 mm |
| Height | 170 mm |
| Material | 5 mm acrylic, 15 mm veneer |
| Step rise | 45 mm |
| Weight | 2.0 kg |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensing Optical Display Table, Black Top 1.8 m
Price:
Circular Display Table, White Tiers and Chrome Legs 1.2 m
Price:
Sleek Cosmetic Display Rack, Black Steel Shelves 1.2 m
Price:








Reviews
There are no reviews yet.