UniqueKiosk · Shenzhen workshop

Vanity Acrylic Tray with Black Insert

$72.00

Square clear acrylic vanity tray 250 x 250 mm with a black glossy insert panel and thick clear walls. Price range: USD 72-110, set by size and insert finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Black Base Insert

A black glossy acrylic panel sits on the base of this acrylic tray. The dark floor lifts pale products forward, so a white bottle or a silver case reads at once. Each wall runs 12 mm thick, and the rim meets the insert without a gap. The contrast does the work that a printed pad would do. The tray measures 250 x 250 mm on the base. This acrylic tray suits a vanity top, a hotel desk or a cosmetics bar. Countertop displays use the same insert detail.

vanity acrylic tray black insert

Thick Clear Walls

The four walls come from 12 mm cast acrylic and stand 35 mm high. A thick wall shows the full depth of the sheet at each corner. The tray then reads as a solid block. Each joint bonds with solvent cement and then gets a flame polish. The rim reflects a bright line under a warm lamp. Weight lands near 900 g for the square acrylic tray. Acrylic displays share this thick wall build.

acrylic tray square front

Display And Home Use

The tray suits a perfume group, a watch winder, a jewelry pull or a bathroom set. A shop sets three bottles on the black floor, and the tray frames them like a plinth. At home the same acrylic tray holds keys, rings and a watch at the door. The black insert hides small scratches better than clear base sheet. A square footprint fits the corner of a counter without waste. Retail displays fixtures follow the same framing idea.

acrylic tray square side

Load And Slip

The square acrylic tray carries about 3 kg when weight spreads over the insert. A glass shelf under the unit needs no extra support at that load. Four felt pads sit under the base, so the tray slides without marking a polished top. Keep the pads clean, because grit under a pad scratches the sheet. Two trays stack for a second color line if you keep the pads on. Display racks hold the stock behind the tray.

Clean The Insert

Wipe the insert with a microfiber cloth and mild soap. The black panel shows fingerprints, so a dry cloth goes over it last. Avoid alcohol and abrasive cream on both the clear wall and the insert. A plastic polish restores light marks on the rim. Clean the acrylic tray corners with a soft brush, where dust settles in a thick wall. Read more about our bench and the polish we use.

Tint And Insert Choice

The insert comes in black, smoke or brushed clear. A black panel suits pale cosmetics and silver jewelry. Smoke suits gold and amber bottles. Size runs from 200 x 200 mm to 300 x 300 mm on request. List price starts at USD 72 for the 250 mm acrylic tray. ukiosks builds this acrylic tray in Shenzhen and can match your insert color, so send your plan through contact us.

acrylic tray wall corner

Specification Detail
Footprint 250 x 250 mm
Wall height 35 mm
Wall thickness 12 mm cast acrylic
Insert Black glossy panel
Load 3 kg
Weight 900 g

Reviews

There are no reviews yet.

Be the first to review “Vanity Acrylic Tray with Black Insert”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop