UniqueKiosk · Shenzhen workshop

Rectangular Acrylic Tray with Cut-Out Handles

$78.00

Clear acrylic tray with two cut-out handles, 8 x 12 inch footprint and 25 mm walls. Price range: USD 78-120, set by size and sheet thickness.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Handles On Both Sides

Two cut-out oval handles sit in the opposite walls of this acrylic tray. Each opening runs about 100 mm long with rounded ends. A hand fits through and the tray moves on a counter without a grip change. The handles are cut from the same sheet, so no extra part is added. This acrylic tray carries rings, watches or folded shirts in one load. The walls stand 25 mm high. See our countertop displays for matching sizes.

acrylic tray cut-out handles

Body And Thickness

The body uses 3 mm cast acrylic sheet on all four walls and on the base. Solvent cement bonds each joint, and a flame polish clears the top rim. The open corners let dust fall through instead of collecting in the tray. Base and walls stay square within 1 mm after cutting. Weight lands near 600 g for the 8 x 12 inch acrylic tray. A heavier 5 mm version holds a full shelf of goods. Our acrylic displays line shares the same joint method.

acrylic tray front view

Open Corner Detail

An open corner means the base plate stops short of the wall join. Two small gaps sit at opposite corners, each about 4 mm. Water and dust drop through, so the acrylic tray suits a bakery or a flower counter. The gaps stay small enough to hold a card or a coin. Check the corners under a light before you buy. A dull cut shows a white line along the edge. Retail displays fixtures with a polished rim read cleaner on a lit shelf.

Where It Fits

The tray suits a jewelry counter, a watch bar, a cosmetics shelf or a hotel front desk. An 8 x 12 inch footprint covers the depth of most display cases. Stack two trays when a shelf runs deep. Staff lift the loaded acrylic tray as one unit for a reset. A countertop easel can stand inside for a price card.

acrylic tray side view

Clean And Carry

Clean the acrylic tray with a microfiber cloth and mild soap. Avoid alcohol and paper towels, which leave fine lines on the surface. The handles take the load, so a full tray stays balanced in one hand. A felt pad under the base protects a glass shelf. Check the pads every quarter and replace them when they flatten. Display racks with glass shelves need the same care.

Sizes And Finish

We build the standard 8 x 12 inch tray in clear, smoke or white tint. Larger sizes run to 12 x 18 inch for a denim shelf. A polished rim shows a bright line under a warm LED. The acrylic tray leaves our bench with a protective film, so peel the film after you place the unit. List price starts at USD 78 for the standard tray. ukiosks can cut this acrylic tray to your case depth and wall height, so ask contact us with your plan.

acrylic tray handle detail

Specification Detail
Size 8 x 12 inch (200 x 300 mm)
Material 3 mm cast acrylic
Handles 2 cut-out oval openings
Wall height 25 mm
Finish Flame polished rim
Weight 600 g

Reviews

There are no reviews yet.

Be the first to review “Rectangular Acrylic Tray with Cut-Out Handles”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop