UniqueKiosk · Shenzhen workshop

Solid Acrylic Block Riser 200 mm

$120.00

Solid clear acrylic block riser with polished faces, 200 mm square and 50 mm thick. Price range: USD 120-200, set by block size and thickness.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Solid Cast Block

A solid block gives this acrylic riser a heavy, steady base. The block measures 200 mm square at 50 mm thick. Cast sheet of that gauge reads clear through the full body. A museum sets a ceramic cup on the top face. A jeweller lays a tray on the same block for a flat field. No hollow space sits under the item. A solid body takes weight without a flex. This acrylic riser suits a high value piece on a low lift. Our acrylic displays use the same block build.

solid acrylic block riser

Polished Faces

Every face of this acrylic riser goes through a diamond polish. The top face reads flat and clear, with no tool mark. A square edge keeps the outline crisp. The polish passes light through the block and casts a soft shadow. A viewer sees the object and not the base. A block of this size weighs about 5 kg. A lift of 50 mm gives a small item presence on a shelf. This acrylic riser sits level on four square edges.

block riser front view

Cut And Finish

A saw cuts the block from cast acrylic of 50 mm. The cut face stays dull until a mill runs it flat. A diamond polish then clears the surface in three passes. Each edge gets a chamfer of 1 mm, so no corner chips. A block takes longer to finish than a hollow cube. The result holds a clean face under a spot lamp. Workers check each block on a flat table. This acrylic riser passes a square test before packing. Our countertop displays share the polish step.

block riser side view

Use In Cases

A jewellery case sets a ring tray on this acrylic riser. A watch shop lifts a single piece above a tray line. A museum room uses the block for a small sculpture. A cosmetics counter raises a bottle at eye level. A gallery sets two blocks for a two step scene. A food display lifts a plate of pastries. The solid body takes a heavy item without a wobble. This acrylic riser fits a case depth of 250 mm. A countertop easel takes the same block.

Option Set

Clear is the standard body for this acrylic riser. A black block gives a dark case a deeper tone. A white block suits a bright shelf with a soft shadow. A frosted top face hides a price card under an item. We can print a size mark on the rear face. A set of three blocks in 30, 40 and 50 mm covers a tier. Each block wraps in foam and a carton. Our display racks list the tier sets.

polished corner detail

Price And Custom Build

List price starts at USD 120 for this 200 mm acrylic riser block in clear 50 mm sheet. A 300 mm block at 80 mm thick lands near USD 210. A solid block holds a heavy piece with no flex. A polished face keeps the focus on the item. A square edge lines up with a case grid. This acrylic riser pairs with retail displays fixtures and retail sign holders. ukiosks builds this acrylic riser to order in Shenzhen. We can reset block size, thickness, edge chamfer and colour. Send your item footprint and we return drawings and a quote.

Specification Detail
Overall size 200 x 200 x 50 mm
Material Solid cast acrylic, clear
Finish Diamond polished faces
Edge 1 mm chamfer, square profile
Weight About 5 kg
Colour Clear, black or white

Reviews

There are no reviews yet.

Be the first to review “Solid Acrylic Block Riser 200 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop