UniqueKiosk · Shenzhen workshop
Printed Header Acrylic Brochure Stand
$140.00
Clear acrylic brochure stand with four stacked pockets and a tall printed header panel, 175 mm wide and 260 mm tall. Price range: USD 140-240, set by tier count and print.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Four Tier Column
Four pockets stack in a single column on this brochure holder. Each tier steps back about 25 mm from the one below. That step lets a reader see four covers at once. The pockets take a sheet up to 150 x 210 mm. A wide base plate of 175 x 120 mm carries the column. Side walls run the full height, so the stack stays square. This brochure holder holds a title series in one narrow spot on a counter.
Header Panel
A tall panel rises above the top pocket on this brochure holder. That panel takes a printed headline, a logo or a price note. We print on the rear face, so the front stays clear and the text reads through. A 260 mm overall height puts the header at a standing eye. A printed panel lifts a plain stand into a small sign. A blank panel ships as standard. This brochure holder can carry one message. A retail sign holder takes the same printed panel.
Panel And Joint Detail
Clear acrylic of 4 mm builds the pockets and the base of this brochure holder. Each pocket floor bends from the side wall in one sheet, so no lip weld shows. Tier joints use solvent cement, which leaves a thin clear line at the step. A flame polish clears the cut edge. The whole unit weighs about 1.2 kg. A felt pad under the base stops a slide on a glass counter. This brochure holder keeps its shape after a full load.
Loading Routine
Staff load this brochure holder from the bottom tier up. Each pocket holds about 15 sheets at 3 mm thick. A full load runs near 60 sheets. A clerk refills one tier in under a minute without moving the unit. A label line under each pocket takes a title card in small type. The front lip stops a sheet from slipping out when a shopper pulls. Our literature displays list the same pocket depth.
Front Counter Fit
A narrow column stand suits a till point, a clinic desk and a hotel stand. A 175 mm width fits beside a card reader with little room lost. Four tiers cover a service list, a price sheet, a terms leaflet and a map. A clear body shows the counter finish under the base. A clerk lifts the unit in one hand for a wipe. Our countertop displays and retail sign holders cover nearby spots.
Price And Custom Build
List price starts at USD 140 for this four tier brochure holder with a blank header. A printed header with a full colour logo lands near USD 195. A column brochure holder puts four titles in a 175 mm slot on a till point. A stepped tier shows every cover at once. A 4 mm sheet keeps the column straight under load. This brochure holder pairs with acrylic displays and retail displays fixtures. ukiosks builds this brochure holder to order in Shenzhen. We can reset tier count, pocket size, header height and print layout. Send your title list and we return drawings and a quote.
| Specification | Detail |
|---|---|
| Tiers | Four stacked pockets |
| Sheet size | Up to 150 x 210 mm |
| Overall size | 175 x 120 x 260 mm |
| Pocket capacity | About 15 sheets each |
| Material | 4 mm cast acrylic, clear |
| Header panel | Blank or reverse printed |
| Weight | About 1.2 kg |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensing Optical Display Table, Black Top 1.8 m
Price:
Circular Display Table, White Tiers and Chrome Legs 1.2 m
Price:
Sleek Cosmetic Display Rack, Black Steel Shelves 1.2 m
Price:








Reviews
There are no reviews yet.