UniqueKiosk · Shenzhen workshop
Backlit Portrait Light Box With Screw Corner Frame
$290.00
Backlit portrait light box with a clear acrylic face and four screw corner caps, A3 at 300 x 420 mm, for window and wall posters. Price range: USD 260-400, set by size and print.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Portrait Panel Format
A tall panel suits a poster that reads top to bottom. This light box runs 300 x 420 mm at A3 size and stands portrait. The face is 4 mm clear acrylic over a black inner border. That border frames the print without a metal edge showing. The back plate is aluminium and carries the driver. Depth is 35 mm, so the unit reads flat on a wall. Weight is about 2.2 kg. A single screw pair holds it in place. The countertop cases line adds a smaller A4 unit.
Four Corner Caps
Four metal caps hold this light box together. Each cap sits over a screw that runs through the acrylic into the back plate. Caps are domed, so no sharp edge sits near a shopper. To change a print, staff remove two caps, lift the sheet and swap the paper. The other two caps stay as a pivot. A cap set of six ships with each unit, so a lost cap does not stop a change. Caps come in silver or black. Every retail display fixtures crew gets a spare set.
Even Backlight
A backlight panel fills this light box with even light. The strip sits on the back plate and faces a diffuser sheet. Light spreads across the whole panel with no bright bar at the edge. Output is about 1000 lux at the centre and 900 lux at the corner. Colour runs at 3000 K, so a skin tone reads true. A black border keeps light from leaking at the edge. The driver takes 12 V and sits behind the plate. A dimmer can be added on the lead for a night setting. display cases walls use the same strip. This light box ships with clear fitting notes.
Build And Packing
Acrylic for this light box is cut on a laser and flame polished at the edge. The back plate is 1.2 mm aluminium, cut and punched for the four screws. The inner border is a printed black film under the acrylic. Screws are stainless with a thread lock, so a cap does not walk loose. Each unit gets a light and cap test before packing. A film covers the face until install. Packing is one carton with a corner guard. cash counter desks store the spare caps.
Where It Hangs
This light box suits a window poster, a lift lobby and a fitting room wall. An A3 face carries a price block, a size guide or a season card. A portrait shape fits a narrow pier between two shelves. The lit face reads at 2.5 m in a dim corridor. A slim depth keeps the panel close to the wall behind a rail. Two units side by side cover a double door. Many shop fit outs fix one at the entrance. food and drink shops units show a promo.
Price And Custom Build
List price starts at USD 290 for this A3 wall unit. An A2 face with a brighter driver lands near USD 380. A backlit light box holds a poster flat and lights it from behind. A black border frames the print with no metal edge. Four caps make a print change a two minute job. ukiosks builds this light box to order in Shenzhen. We can reset panel size, border colour, cap finish and driver output. Send your plan and we return drawings and a quote.
| Specification | Detail |
|---|---|
| Face size | A3, 300 x 420 mm (custom A4-A2) |
| Face | 4 mm clear acrylic over black border |
| Back plate | 1.2 mm aluminium with driver |
| Depth | 35 mm overall |
| Light | Backlit LED, about 1000 lux at 3000 K |
| Fix | Four screw caps, two for a print swap |
| Weight | About 2.2 kg |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensing Optical Display Table, Black Top 1.8 m
Price:
Circular Display Table, White Tiers and Chrome Legs 1.2 m
Price:
Sleek Cosmetic Display Rack, Black Steel Shelves 1.2 m
Price:








Reviews
There are no reviews yet.